Poliform의 유서 깊은 리빙 시스템인 Wall System은 뛰어난 활용성을 자랑하는 가구 프로그램입니다. 끊임없이 진화하는 이 제품은 거실의 미적, 기능적 중심인 책장을 기반으로 합니다. 하중을 견디는 책장에서 디자인된 Wall System은 얇은 격자와 대리석과 같은 고급 소재의 선반과 도어, 진열장 또는 뒷면 패널의 조합으로 가벼워졌습니다. 바 또는 홈 오피스 코너를 만들 수 있는 힌지 또는 플랩 도어, 물건, 예술품, 도자기 및 유리 제품을 전시할 수 있는 디스플레이 케이스와 쇼케이스, 서랍과 TV 스탠드, 조명 시스템 등 책장의 기능을 확장하는 일련의 요소들이 책장의 기능을 확장합니다. Wall System의 다재다능함은 미적 관점에서도 표현되며, 어떤 구성에도 개성과 스타일을 부여할 수 있는 마감재를 통해 표현됩니다.
Poliform’s historic living room system, Wall System is an exceptionally versatile furniture range. Constantly evolving, it is based on the bookcase as the aesthetic and functional centerpiece of the living room. Designed around the load-bearing bookcase, Wall System is lightened by thin grids and the combination of shelves and doors, display cases, or backs in precious materials such as marble. A series of elements expand the functionality of the bookcase, such as hinged, sliding, or flap doors that can also be used to create bar corners or home offices; display cabinets and glass cases for displaying objects, works of art, ceramics, and glassware; drawers and TV portals; and lighting systems. The versatility of Wall System is also expressed from an aesthetic point of view, with finishes capable of giving character and style to any composition.
Our warranty is valid for 2 years from the date of purchase and covers all manufacturing defects. The warranty period enters into force from the date printed on your receipt or sales slip. You may be asked to present proof of purchase when requesting service. The warranty is non-transferable and is valid only for the original purchaser. It covers repair or replacement of unusable or defective parts free of charge during the warranty period after inspection and acceptance by Poliform or its agent. Natural variations in the colour of the wood, changes in colour under ambient or artificial light, slight variations in dimensions owing to high humidity or dry conditions and the grain of wood, knots or other natural characteristics of wood products are not covered by the warranty. As to suede and leather, occasional natural marks, wrinkles, changes in brightness and tone, specks and slight imperfections folds due to extension after regular use, are not considered defects but are the distinctive traits of natural and authentic products. In some cases (aged-looking leather and nubuck leather, above all with light colours), these features are especially marked, as the kind of tanning for these leathers tends to point out the pureness of the product and not to cover it with painting or pressure print. Some types of fabric show features due to the composition and the kind of manufacturing that aren’t to be considered as defects.
For example: “staple” or “streaked” and “crumpled effect” for linen ”spotted effect” or “curl” , the ”light/dark effect” and the ”imprint effect” for velvets and chenille. In fabrics, suedes or leather, each production lot can present slight variations in colour as compared to samples or products produced in the past. The warranty excludes damage resulting from careless or incorrect furniture installation, potential damage from accidents such as that resulting from a fall, impact, natural disaster, fire and, in any case, all defects that cannot be attributed to defects in the manufacture of the product. Moreover, the warranty is not valid in the event that our products are disassembled, modified or repaired by anyone other than authorised Poliform personnel. Damage due to poor upkeep or improper use of the product are not considered defects of manufacture. You will find useful recommendations in the instruction booklet regarding the use and care of your product. If you have any doubts or require further information, consult the Poliform reseller where your product was purchased. For any situation not expressly covered by this warranty. Legal provisions shall apply.
Poliform uses Class EPF-S E 0.5, wood-based panels, the most reliable in conforming to EU standards EN 120 and EN 717-2 and in line with the limits established by the American regulation CARB Phase 2, with respect to formaldehyde release. With respect to varnish, Poliform exclusively uses polyurethane coatings free of heavy metals and volatile organic compounds (VOC) belonging to the various classes within table A1 of the Italian Ministerial Decree of 12 july 1990 and/or Classes i and ii within table D of the Italian Ministerial Decree of 12 july 1990.
Our warranty is valid for 2 years from the date of purchase and covers all manufacturing defects. The warranty period enters into force from the date printed on your receipt or sales slip. You may be asked to present proof of purchase when requesting service. The warranty is non-transferable and is valid only for the original purchaser. It covers repair or replacement of unusable or defective parts free of charge during the warranty period after inspection and acceptance by Poliform or its agent. Natural variations in the colour of the wood, changes in colour under ambient or artificial light, slight variations in dimensions owing to high humidity or dry conditions and the grain of wood, knots or other natural characteristics of wood products are not covered by the warranty. As to suede and leather, occasional natural marks, wrinkles, changes in brightness and tone, specks and slight imperfections folds due to extension after regular use, are not considered defects but are the distinctive traits of natural and authentic products. In some cases (aged-looking leather and nubuck leather, above all with light colours), these features are especially marked, as the kind of tanning for these leathers tends to point out the pureness of the product and not to cover it with painting or pressure print. Some types of fabric show features due to the composition and the kind of manufacturing that aren’t to be considered as defects.
For example: “staple” or “streaked” and “crumpled effect” for linen ”spotted effect” or “curl” , the ”light/dark effect” and the ”imprint effect” for velvets and chenille. In fabrics, suedes or leather, each production lot can present slight variations in colour as compared to samples or products produced in the past. The warranty excludes damage resulting from careless or incorrect furniture installation, potential damage from accidents such as that resulting from a fall, impact, natural disaster, fire and, in any case, all defects that cannot be attributed to defects in the manufacture of the product. Moreover, the warranty is not valid in the event that our products are disassembled, modified or repaired by anyone other than authorised Poliform personnel. Damage due to poor upkeep or improper use of the product are not considered defects of manufacture. You will find useful recommendations in the instruction booklet regarding the use and care of your product. If you have any doubts or require further information, consult the Poliform reseller where your product was purchased. For any situation not expressly covered by this warranty. Legal provisions shall apply.
Poliform uses Class EPF-S E 0.5, wood-based panels, the most reliable in conforming to EU standards EN 120 and EN 717-2 and in line with the limits established by the American regulation CARB Phase 2, with respect to formaldehyde release. With respect to varnish, Poliform exclusively uses polyurethane coatings free of heavy metals and volatile organic compounds (VOC) belonging to the various classes within table A1 of the Italian Ministerial Decree of 12 july 1990 and/or Classes i and ii within table D of the Italian Ministerial Decree of 12 july 1990.
Subcortical tree trunk sections nearest the darker innermost annual rings, also known as duramen. Heartwood is considered to be high-quality, genuine natural wood in contrast to wood panels made from wood particles or multilaminates.
Panel composed of wood particles with a thin layer of solid wood.
Wood-based panels made from wood particles (shavings, wood chips, etc.) The wood particles are held together with hardening synthetic resin and then heat pressurised. Particle board panels use an assortment of less costly wood which is generally the byproduct of other processes: this is why this type of product is of interest from an ecological standpoint.
Thin slices of wood between 3 and 0.30 Millimetres. Peeling derives its meaning from the fact that the tree trunk is peeled using a lathe instead of a saw. The trunk is sliced lengthwise. The slices are joined together then glued and moulded on less costly wood or raw panels of any kind (multilaminates, particle board, waferboard, plywood, hollow core board). The use of wood veneer allows the manufacture of wood products with greater durability, more resistance to woodworms, greater consistency and more attention to visible parts. The use of wood veneer also satisfies today’s need for a more ecology-conscious application of wood resources.
Self-supporting material (from 2mm thickness on) made of layers of kraft paper soaked in thermoplastic hardening resin and one or more surfacing layers of decorative paper soaked in aminoplastic resin pressurized to 9 mpa at 150°c. One or both sides can have decorative surfaces.
Core board panel made by gluing two multilaminates (usually 4 mm thick) on a frame of spruce mouldings or other common wood. The external surfaces can be veneered or lacquered. Inside the interspace in the vertical mouldings, the large panels contain plywood to stiffen the surface. This method of construction allow panels to be created that add strength together with lightness, proving to be ideal, for example, for wardrobe doors.
A panel composed of wood particles and covered with a cellulose base material (paper), sheets of polymer (pvc veneer, abs, etc.) or melamine resins.
Panels of polyesterized chipboard on the back and then lacquered on both sides with polyurethane polymer-based paint having a high molecular weight. The panels are dimensionally stable.
A hardening synthetic resin obtained from polycondensation of formaldehyde. It is a colorless, odorless resin that is resistant to water, chemicals, abrasion and heat and which has particular transparency under light.
(Acrylonitrile Butadiene Styrene) A synthetic thermosetting plastic resin with good resistance to acids. It repels dust and cannot warp. For these reasons, abs is used in the manufacture of edges and sheets for surface coating.
Common glass is composed almost exclusively of silica, the same substance as quartz. In its purest state, glass is transparent, relatively hard, almost inert from a chemical and biological standpoint and presents a very smooth surface. Glass is available in a wide range of finishes and colors for interior decoration. It is possible to circumvent its intrinsic fragility by using chemical treatments (adding other minerals to the compound) or physical processes, such as tempering.
Glass subjected to a thermal tempering process, heated at 640° and rapidly cooled by air jets. A highly brittle sheet of glass with high residual stress and enhanced strength is obtained using this process. When broken, tempered glass shatters into pebble-like pieces without sharp edges.
A silvery, highly ductile metal. Its chief properties are resistance to corrosion, tensile strength and it is light weight. These properties are ideal for manufacturing durable yet lightweight frame components. Raw aluminum can be worked using several different processing techniques such as fusion, forging or pressing.
Composite plant fibre obtained from the phloem (surface bark) of linum usitatissimum, composed of approximately 70% cellulose. It is a fresh, wear-resistant and soft fibre. Linen is dyed and then finished with special techniques that make it dimensionally stable but give it a slightly stonewashed appearance that amplifies its characteristics as a natural fibre that is extremely comfortable to the touch. It is treated with a special finishing that gives it a natural, soft appearance.
Subcortical tree trunk sections nearest the darker innermost annual rings, also known as duramen. Heartwood is considered to be high-quality, genuine natural wood in contrast to wood panels made from wood particles or multilaminates.
Panel composed of wood particles with a thin layer of solid wood.
Wood-based panels made from wood particles (shavings, wood chips, etc.) The wood particles are held together with hardening synthetic resin and then heat pressurised. Particle board panels use an assortment of less costly wood which is generally the byproduct of other processes: this is why this type of product is of interest from an ecological standpoint.
Thin slices of wood between 3 and 0.30 Millimetres. Peeling derives its meaning from the fact that the tree trunk is peeled using a lathe instead of a saw. The trunk is sliced lengthwise. The slices are joined together then glued and moulded on less costly wood or raw panels of any kind (multilaminates, particle board, waferboard, plywood, hollow core board). The use of wood veneer allows the manufacture of wood products with greater durability, more resistance to woodworms, greater consistency and more attention to visible parts. The use of wood veneer also satisfies today’s need for a more ecology-conscious application of wood resources.
Self-supporting material (from 2mm thickness on) made of layers of kraft paper soaked in thermoplastic hardening resin and one or more surfacing layers of decorative paper soaked in aminoplastic resin pressurized to 9 mpa at 150°c. One or both sides can have decorative surfaces.
Core board panel made by gluing two multilaminates (usually 4 mm thick) on a frame of spruce mouldings or other common wood. The external surfaces can be veneered or lacquered. Inside the interspace in the vertical mouldings, the large panels contain plywood to stiffen the surface. This method of construction allow panels to be created that add strength together with lightness, proving to be ideal, for example, for wardrobe doors.
A panel composed of wood particles and covered with a cellulose base material (paper), sheets of polymer (pvc veneer, abs, etc.) or melamine resins.
Panels of polyesterized chipboard on the back and then lacquered on both sides with polyurethane polymer-based paint having a high molecular weight. The panels are dimensionally stable.
A hardening synthetic resin obtained from polycondensation of formaldehyde. It is a colorless, odorless resin that is resistant to water, chemicals, abrasion and heat and which has particular transparency under light.
(Acrylonitrile Butadiene Styrene) A synthetic thermosetting plastic resin with good resistance to acids. It repels dust and cannot warp. For these reasons, abs is used in the manufacture of edges and sheets for surface coating.
Common glass is composed almost exclusively of silica, the same substance as quartz. In its purest state, glass is transparent, relatively hard, almost inert from a chemical and biological standpoint and presents a very smooth surface. Glass is available in a wide range of finishes and colors for interior decoration. It is possible to circumvent its intrinsic fragility by using chemical treatments (adding other minerals to the compound) or physical processes, such as tempering.
Glass subjected to a thermal tempering process, heated at 640° and rapidly cooled by air jets. A highly brittle sheet of glass with high residual stress and enhanced strength is obtained using this process. When broken, tempered glass shatters into pebble-like pieces without sharp edges.
A silvery, highly ductile metal. Its chief properties are resistance to corrosion, tensile strength and it is light weight. These properties are ideal for manufacturing durable yet lightweight frame components. Raw aluminum can be worked using several different processing techniques such as fusion, forging or pressing.
Composite plant fibre obtained from the phloem (surface bark) of linum usitatissimum, composed of approximately 70% cellulose. It is a fresh, wear-resistant and soft fibre. Linen is dyed and then finished with special techniques that make it dimensionally stable but give it a slightly stonewashed appearance that amplifies its characteristics as a natural fibre that is extremely comfortable to the touch. It is treated with a special finishing that gives it a natural, soft appearance.
The following instructions, broken down by material, provide the best recommendations for preserving your Poliform product for years to come. Use only recommended cleaning products and avoid harsh or abrasive detergents. Proper care will enable you to enjoy your quality Poliform product for many years.
We advise to use a neutral detergent. Avoid products containing acetone, thinners, ammonia, abrasive detergents or furniture wax. Caution: the surface of the wood is treated to resist moderate amounts of grease and dirt. In addition, surface coatings contain water-resistant and anti-yellowing agents. However, avoid exposing surfaces to scoring or high temperature.
We advise to use a neutral detergent Avoid products containing acetone, thinners, ammonia, abrasive detergents or furniture wax. Warning: during initial cleaning, the cloth may pick up some color. This is a physiological phenomenon and is linked to the presence of paint powders that come to the surface during the drying process: once it is eliminated, you won’t see it again.
We advise to use a neutral detergent Avoid products containing acetone, chlorine, thinner or abrasive cleaners.
Se vinegar diluted in abundant water or glass cleaning products. Warning: in the event that glass is mounted in an aluminum frame, avoid alcohol or ammonia, which may damage the frame.
Occasionally dust the covering with a soft, neutral cotton cloth. For stains, use a damp cotton cloth (not wet) and neutral detergent only, dab the area, and if necessary, wipe without rubbing excessively but rather in a circular motion working from the outside of the stain inwards, then dry the area with a hair dryer at a distance of approximately 30-40 cm to prevent streaks.
Lubricate with any product widely available on the market. Use lubricant periodically on hinges and drawer slides before cleaning to remove possible dust. For metal parts, simply wipe down periodically with a damp cloth. Avoid any kind of abrasive cleaning product.
Poliform recommends that you do not dispose of your product in the outdoors. Because of our manufacturing techology and the routine use of recyclable materials, discarded Poliform products can be re-used in the manufacturing process. For this reason, drop off your Poliform product at the waste disposal centres within your municipality.
To facilitate the collection, reuse, recovery and recycling of packaging, we inform you that the packaging is composed as follows: PAP20 carton, PS 06 polystyrene, PELD 04 expanded polyethylene (down), Profiles in Systempack PELD 04.
The following instructions, broken down by material, provide the best recommendations for preserving your Poliform product for years to come. Use only recommended cleaning products and avoid harsh or abrasive detergents. Proper care will enable you to enjoy your quality Poliform product for many years.
We advise to use a neutral detergent. Avoid products containing acetone, thinners, ammonia, abrasive detergents or furniture wax. Caution: the surface of the wood is treated to resist moderate amounts of grease and dirt. In addition, surface coatings contain water-resistant and anti-yellowing agents. However, avoid exposing surfaces to scoring or high temperature.
We advise to use a neutral detergent Avoid products containing acetone, thinners, ammonia, abrasive detergents or furniture wax. Warning: during initial cleaning, the cloth may pick up some color. This is a physiological phenomenon and is linked to the presence of paint powders that come to the surface during the drying process: once it is eliminated, you won’t see it again.
We advise to use a neutral detergent Avoid products containing acetone, chlorine, thinner or abrasive cleaners.
Se vinegar diluted in abundant water or glass cleaning products. Warning: in the event that glass is mounted in an aluminum frame, avoid alcohol or ammonia, which may damage the frame.
Occasionally dust the covering with a soft, neutral cotton cloth. For stains, use a damp cotton cloth (not wet) and neutral detergent only, dab the area, and if necessary, wipe without rubbing excessively but rather in a circular motion working from the outside of the stain inwards, then dry the area with a hair dryer at a distance of approximately 30-40 cm to prevent streaks.
Lubricate with any product widely available on the market. Use lubricant periodically on hinges and drawer slides before cleaning to remove possible dust. For metal parts, simply wipe down periodically with a damp cloth. Avoid any kind of abrasive cleaning product.
Poliform recommends that you do not dispose of your product in the outdoors. Because of our manufacturing techology and the routine use of recyclable materials, discarded Poliform products can be re-used in the manufacturing process. For this reason, drop off your Poliform product at the waste disposal centres within your municipality.
To facilitate the collection, reuse, recovery and recycling of packaging, we inform you that the packaging is composed as follows: PAP20 carton, PS 06 polystyrene, PELD 04 expanded polyethylene (down), Profiles in Systempack PELD 04.
Material: panel of wooden particles faced with Tupan
Finishing: mat/glossy lacquered colour
Edge: ABS
Features: for features here not specified, are valid those used for the panels with wood finishing
Material: panel of wooden particles veneered
Thickness: 35 mm
Horizontal edge: ABS
Vertical edge: solid wood
Features: plinth in black PVC of 18 mm. Up to height 1551 mm solid wood also on the upper edge
Material: panel of wooden particles veneered
Thickness: 35 mm
Edge – Frontal: solid wood – Lateral ABS
Features: bases with plinth in black PVC of 18 mm and height level adjuster.
Material: panel of wooden particles veneered
Thickness: 20 mm
Edge
– Vertical: ABS
– Horizontal: PVC profile and rubber
Material: veneered wood particleboard panel, lacquer or glossy porcelain stoneware
Thickness: 12 mm veneered or lacquered, 6 mm porcelain stoneware
Features: panels with barrier glued and fixed by means of magnets to the structural panel behind it
Material: panel of wooden particles veneered
Thickness: 35 mm
Edge
– Frontal: solid wood
– Lateral: ABS
Features: supplied with metal joints for fixing to the sides
Material: panel of wooden particles veneered
Thickness: 35 mm
Edge
– Frontal: solid wood
– Lateral: ABS
Features: supplied with metal and plastic joints for positioning, where needed
Material: panel of wooden particles veneered
Thickness: 35 mm
Edge: ABS
Features: supplied with metal and plastic joints for positioning, where needed
Material: panel of wooden particles veneered
Thickness: 35 mm
Edge:
– Frontal: solid wood
– Lateral: ABS
Features: supplied with metal joints for fixing to the sides
Material veneered hollow core panel, lacquered
Thickness: 60 mm
Edge:
– Lateral: ABS
– Frontal: solid wood
Material: transparent glass
Thickness: 8 mm
Features: metal and PVC pivots for positioning where needed
Material: panel of wooden particles veneered
Thickness: 14 – 20 mm
Edge: veneer
Features: supplied with metal handles
Structure: panel of wooden particles
Thickness 25 mm veneered
Edge: veneer
Features: only available with push-pull opening
Material: panel of wooden particles faced with melamine
Sides thickness: 14 mm
Back thickness: 14 mm
Bottom thickness: 6 mm
Features: metal slide runners with ball bearing with partial or full extraction glides and self closing mechanism.
Lacquered finishing
Material: panel of medium density fibre
– Thickness: 12 mm
– Edge: ABS
Wooden finishing
Material: panel of wooden particles veneered
– Thickness: 12 mm
– Edge: solid wood
Leaf door: spring hinge closing.
Sliding door: movement by means of trolleys inserted in the upper rail and guided by the hook to the special plinth.
Material: panel of wooden particles veneered
Thickness: 20 mm
Edge: veneer
Structure: panel of wooden particles
Thickness: 25 mm veneered
Edge: veneer
Features: avaible only with push-pull opening
Frame: aluminum painted
Door: transparent glass, glossy painted/mat painted/reflecting glass
Thickness: 20 mm
Features: avaible only with push-pull opening
Structure: honeycomb panel veneered
Thickness: 45 mm
Structure: honeycomb panel covered in hide
Thickness: 50 mm
Frame: aluminium painted
Door: glass
Thickness: 45 mm
Material: glass
Frame: aluminium painted
Thickness: 40 mm
Features: 180° opening with hinges on fixed top shelf and base
Structure: panel of wooden particles veneered
Thickness: 25 mm
Handle profile: aluminium painted
Features: inner side covered in hide
Structure: panel of wooden particles veneered
Thickness: 25 mm
Handle profile: aluminium painted
Frame: aluminium painted
Door: glass
Thickness: 14 mm
Features: hinges fixed on upper and lower shelf, 180°opening. In the jutting version supplied with glass sides arranged for fixing to the structure
Structure: panel of wooden particles veneered
Thickness: 14 mm
Material: panel of wooden particles veneered
Thickness: 35 mm
Edge: solid wood on 3 sides and melamine on the back sides.
Material: metal
Features: arranged for hooking to the rail at the height of 1925 mm
Material: panel of wooden particles veneered
Features: to be inserted flush to the structure or jutting out
Material: panel of wooden particles veneered
Features: to be inserted flush to the structure or jutting out
Material: panel of wooden particles veneered
Thickness: 30 mm
Material: painted/covered aluminium
Thickness: 35 mm
Features: glass thickness 4 mm glued in the side
Material: painted/covered aluminium
Thickness: 35 mm
Material: panel of medium density fibre mat lacquered colours
Thickness: 14 mm
Material: pannello di particelle di legno nobilitato
Thickness: 20 mm
Edge: ABS
Features: available for floor positioning with aluminium painted plinth with leveller or for wall and wall panelling fixing with height adjustable wall brackets.
Material: panel of wooden particles faced with melamine, veneered or lacquered
Thickness: 20 mm
Edge: ABS
Features: available for floor positioning with aluminium painted plinth with leveler or for wall and wall panelling fixing with height adjustable wall brackets.
Material: panel of wooden particles faced with melamine
Thickness: 10 mm
Material: panel of wooden particles faced with melamine, veneered, lacquered, covered in fabric Thickness: 10 – 15 – 20 mm
Material: panel of wooden particles faced with melamine, veneered, lacquered or in glass
Thickness: wood 20 mm – glass 8 mm
Edge: ABS
Material: panel of wooden particles veneered – lacquered
Thickness: 20 mm
Edge: veneered – lacquered
Features: soft closing mechanism
Material: aluminium painted profile, glass th 4 mm with painted perimeter band
Thickness: 20 mm
Features: push-pull opening
Material: panel of wooden particles veneered, lacquered or marble
Thickness: wood 14 mm – marble 18 mm
Material: panel of wooden particles veneered – lacquered
Thickness: 20 mm
Edge: veneer – ABS
Material: panel of wooden particles faced with melamine
Thickness: sides 14 mm
Thickness: back panel 14 mm
Thickness: bottom 6 mm
Edge: ABS Features: metal slide runners with ball bearing with full extraction glides and self closing mechanism.
Material: laminated panel veneered – lacquered
Thickness: 8 mm
Material: panel of wooden particles veneered – lacquered – covered in fabric
Thickness: 30 mm
Edge: veneer – ABS
Features: metal profile wall connections with bayonet recess. Built-in levelers and perimeter closing profile in painted aluminium.
Material: medium density panel veneered – lacquer
Thickness: structure 20 mm
Thickness back panel 10 mm
Edge: ABS
Features: for wall fixing with height adjustable wall brackets
Material: panel of wooden particles veneered – lacquer
Thickness: 20 mm
Edge: veneered – ABS
Features: pressure opening
Material: aluminium painted profile and glass th 4 mm
Thickness: 20 mm
Features: pressure opening
Material: aluminium plated medium density fibre panel 2 sides lacquer – glass
Thickness: 8 mm
Material: aluminium plated medium density fibre panel 2 sides lacquer
Thickness: 8 mm
Edge: ABS
Features: for adjustable wall fixing
Material: medium density fibre panel melamine – veneered – lacquer
Thickness: 15 mm
Edge: ABS + gum
Material: aluminium painted
Thickness: 32 mm
Features: upper and lower adjustments
Material: aluminium veneered + aluminium painted
Thickness: 32mm
Features: upper and lower adjustments
Material: aluminium painted
Material: aluminium veneered + aluminium painted
Material: panel of wooden particles in medium density fibre veneered
Thickness: 20 mm
Edge: veneered
Material: panel of wooden particles in medium density fibre veneered
Thickness: 6 mm
Edge: veneered
Material: panel of wooden particles in medium density fibre veneered
Thickness: 20 mm
Edge: veneered
Features: shaped external sides, soft closing mechanism
Material: panel of wooden particles in medium density fibre veneered
Thickness: 20 mm
Edge: veneered
Features: pressure opening
Material: panel of wooden particles in medium density fibre veneered
Thickness: 20 mm
Edge: veneered
Features: pressure opening
Material: panel of wooden particles in medium density fibre veneered
Thickness: 20 mm
Edge: veneered
Material: panel of wooden particles faced with melamine
Thickness: 14 mm sides, 14 mm back panel and 6 mm bottom
Edge: ABS
Features: ball bearings metal runners with full extraction glides and soft closing mechanism with pressure opening
Material: panel of wooden particles faced with Tupan
Finishing: mat/glossy lacquered colour
Edge: ABS
Features: for features here not specified, are valid those used for the panels with wood finishing
Material: panel of wooden particles veneered
Thickness: 35 mm
Horizontal edge: ABS
Vertical edge: solid wood
Features: plinth in black PVC of 18 mm. Up to height 1551 mm solid wood also on the upper edge
Material: panel of wooden particles veneered
Thickness: 35 mm
Edge – Frontal: solid wood – Lateral ABS
Features: bases with plinth in black PVC of 18 mm and height level adjuster.
Material: panel of wooden particles veneered
Thickness: 20 mm
Edge
– Vertical: ABS
– Horizontal: PVC profile and rubber
Material: veneered wood particleboard panel, lacquer or glossy porcelain stoneware
Thickness: 12 mm veneered or lacquered, 6 mm porcelain stoneware
Features: panels with barrier glued and fixed by means of magnets to the structural panel behind it
Material: panel of wooden particles veneered
Thickness: 35 mm
Edge
– Frontal: solid wood
– Lateral: ABS
Features: supplied with metal joints for fixing to the sides
Material: panel of wooden particles veneered
Thickness: 35 mm
Edge
– Frontal: solid wood
– Lateral: ABS
Features: supplied with metal and plastic joints for positioning, where needed
Material: panel of wooden particles veneered
Thickness: 35 mm
Edge: ABS
Features: supplied with metal and plastic joints for positioning, where needed
Material: panel of wooden particles veneered
Thickness: 35 mm
Edge:
– Frontal: solid wood
– Lateral: ABS
Features: supplied with metal joints for fixing to the sides
Material veneered hollow core panel, lacquered
Thickness: 60 mm
Edge:
– Lateral: ABS
– Frontal: solid wood
Material: transparent glass
Thickness: 8 mm
Features: metal and PVC pivots for positioning where needed
Material: panel of wooden particles veneered
Thickness: 14 – 20 mm
Edge: veneer
Features: supplied with metal handles
Structure: panel of wooden particles
Thickness 25 mm veneered
Edge: veneer
Features: only available with push-pull opening
Material: panel of wooden particles faced with melamine
Sides thickness: 14 mm
Back thickness: 14 mm
Bottom thickness: 6 mm
Features: metal slide runners with ball bearing with partial or full extraction glides and self closing mechanism.
Lacquered finishing
Material: panel of medium density fibre
– Thickness: 12 mm
– Edge: ABS
Wooden finishing
Material: panel of wooden particles veneered
– Thickness: 12 mm
– Edge: solid wood
Leaf door: spring hinge closing.
Sliding door: movement by means of trolleys inserted in the upper rail and guided by the hook to the special plinth.
Material: panel of wooden particles veneered
Thickness: 20 mm
Edge: veneer
Structure: panel of wooden particles
Thickness: 25 mm veneered
Edge: veneer
Features: avaible only with push-pull opening
Frame: aluminum painted
Door: transparent glass, glossy painted/mat painted/reflecting glass
Thickness: 20 mm
Features: avaible only with push-pull opening
Structure: honeycomb panel veneered
Thickness: 45 mm
Structure: honeycomb panel covered in hide
Thickness: 50 mm
Frame: aluminium painted
Door: glass
Thickness: 45 mm
Material: glass
Frame: aluminium painted
Thickness: 40 mm
Features: 180° opening with hinges on fixed top shelf and base
Structure: panel of wooden particles veneered
Thickness: 25 mm
Handle profile: aluminium painted
Features: inner side covered in hide
Structure: panel of wooden particles veneered
Thickness: 25 mm
Handle profile: aluminium painted
Frame: aluminium painted
Door: glass
Thickness: 14 mm
Features: hinges fixed on upper and lower shelf, 180°opening. In the jutting version supplied with glass sides arranged for fixing to the structure
Structure: panel of wooden particles veneered
Thickness: 14 mm
Material: panel of wooden particles veneered
Thickness: 35 mm
Edge: solid wood on 3 sides and melamine on the back sides.
Material: metal
Features: arranged for hooking to the rail at the height of 1925 mm
Material: panel of wooden particles veneered
Features: to be inserted flush to the structure or jutting out
Material: panel of wooden particles veneered
Features: to be inserted flush to the structure or jutting out
Material: panel of wooden particles veneered
Thickness: 30 mm
Material: painted/covered aluminium
Thickness: 35 mm
Features: glass thickness 4 mm glued in the side
Material: painted/covered aluminium
Thickness: 35 mm
Material: panel of medium density fibre mat lacquered colours
Thickness: 14 mm
Material: pannello di particelle di legno nobilitato
Thickness: 20 mm
Edge: ABS
Features: available for floor positioning with aluminium painted plinth with leveller or for wall and wall panelling fixing with height adjustable wall brackets.
Material: panel of wooden particles faced with melamine, veneered or lacquered
Thickness: 20 mm
Edge: ABS
Features: available for floor positioning with aluminium painted plinth with leveler or for wall and wall panelling fixing with height adjustable wall brackets.
Material: panel of wooden particles faced with melamine
Thickness: 10 mm
Material: panel of wooden particles faced with melamine, veneered, lacquered, covered in fabric Thickness: 10 – 15 – 20 mm
Material: panel of wooden particles faced with melamine, veneered, lacquered or in glass
Thickness: wood 20 mm – glass 8 mm
Edge: ABS
Material: panel of wooden particles veneered – lacquered
Thickness: 20 mm
Edge: veneered – lacquered
Features: soft closing mechanism
Material: aluminium painted profile, glass th 4 mm with painted perimeter band
Thickness: 20 mm
Features: push-pull opening
Material: panel of wooden particles veneered, lacquered or marble
Thickness: wood 14 mm – marble 18 mm
Material: panel of wooden particles veneered – lacquered
Thickness: 20 mm
Edge: veneer – ABS
Material: panel of wooden particles faced with melamine
Thickness: sides 14 mm
Thickness: back panel 14 mm
Thickness: bottom 6 mm
Edge: ABS Features: metal slide runners with ball bearing with full extraction glides and self closing mechanism.
Material: laminated panel veneered – lacquered
Thickness: 8 mm
Material: panel of wooden particles veneered – lacquered – covered in fabric
Thickness: 30 mm
Edge: veneer – ABS
Features: metal profile wall connections with bayonet recess. Built-in levelers and perimeter closing profile in painted aluminium.
Material: medium density panel veneered – lacquer
Thickness: structure 20 mm
Thickness back panel 10 mm
Edge: ABS
Features: for wall fixing with height adjustable wall brackets
Material: panel of wooden particles veneered – lacquer
Thickness: 20 mm
Edge: veneered – ABS
Features: pressure opening
Material: aluminium painted profile and glass th 4 mm
Thickness: 20 mm
Features: pressure opening
Material: aluminium plated medium density fibre panel 2 sides lacquer – glass
Thickness: 8 mm
Material: aluminium plated medium density fibre panel 2 sides lacquer
Thickness: 8 mm
Edge: ABS
Features: for adjustable wall fixing
Material: medium density fibre panel melamine – veneered – lacquer
Thickness: 15 mm
Edge: ABS + gum
Material: aluminium painted
Thickness: 32 mm
Features: upper and lower adjustments
Material: aluminium veneered + aluminium painted
Thickness: 32mm
Features: upper and lower adjustments
Material: aluminium painted
Material: aluminium veneered + aluminium painted
Material: panel of wooden particles in medium density fibre veneered
Thickness: 20 mm
Edge: veneered
Material: panel of wooden particles in medium density fibre veneered
Thickness: 6 mm
Edge: veneered
Material: panel of wooden particles in medium density fibre veneered
Thickness: 20 mm
Edge: veneered
Features: shaped external sides, soft closing mechanism
Material: panel of wooden particles in medium density fibre veneered
Thickness: 20 mm
Edge: veneered
Features: pressure opening
Material: panel of wooden particles in medium density fibre veneered
Thickness: 20 mm
Edge: veneered
Features: pressure opening
Material: panel of wooden particles in medium density fibre veneered
Thickness: 20 mm
Edge: veneered
Material: panel of wooden particles faced with melamine
Thickness: 14 mm sides, 14 mm back panel and 6 mm bottom
Edge: ABS
Features: ball bearings metal runners with full extraction glides and soft closing mechanism with pressure opening
요청된 정보를 입력하시고 30일 동안 모든 파일을 다운로드하십시오.
링크를 클릭하시면 poliform.it 웹사이트로 이동됩니다. 코퍼레이트 웹사이트를 방문하시어 Poliform 월드, 스페셜 프로젝트, 최신 소식, 그리고 전 세계에서 진행되는 이벤트를 만나보십시오.
