センツァフィーネは、ワードローブ専用の空間をエレガントに仕上げるためにデザインされたアイランドチェストです。Poliformのチェストは、ウォークインクローゼットの仕上げに合わせて、サイズや設備をカスタマイズすることができます。
センツァフィーネは、ワードローブ専用の空間をエレガントに仕上げるためにデザインされたアイランドチェストです。Poliformのチェストは、ウォークインクローゼットの仕上げに合わせて、サイズや設備をカスタマイズすることができます。
センツァフィーネは、ワードローブ専用の空間をエレガントに仕上げるためにデザインされたアイランドチェストです。Poliformのチェストは、ウォークインクローゼットの仕上げに合わせて、サイズや設備をカスタマイズすることができます。
必要な情報を入力すると、30日間すべてのファイルをダウンロードできます
Our warranty is valid for 2 years from the date of purchase and covers all manufacturing defects. The warranty period enters into force from the date printed on your receipt or sales slip. You may be asked to present proof of purchase when requesting service. The warranty is non-transferable and is valid only for the original purchaser. It covers repair or replacement of unusable or defective parts free of charge during the warranty period after inspection and acceptance by Poliform or its agent. Natural variations in the colour of the wood, changes in colour under ambient or artificial light, slight variations in dimensions owing to high humidity or dry conditions and the grain of wood, knots or other natural characteristics of wood products are not covered by the warranty. As to suede and leather, occasional natural marks, wrinkles, changes in brightness and tone, specks and slight imperfections folds due to extension after regular use, are not considered defects but are the distinctive traits of natural and authentic products. In some cases (aged-looking leather and nubuck leather, above all with light colours), these features are especially marked, as the kind of tanning for these leathers tends to point out the pureness of the product and not to cover it with painting or pressure print.
The staining effect on nubuck leather is to be considered a characteristic trait of the product. For nubuck leather, prolonged contact with the grease on our skin and hair may cause dark stains to appear over time. Some types of fabric show features due to the composition and the kind of manufacturing that aren’t to be considered as defects. For example: “staple” or “streaked” and “crumpled effect” for linen ”spotted effect” or “curl” , the ”light/dark effect” and the ”imprint effect” for velvets and chenille. In fabrics, suedes or leather, each production lot can present slight variations in colour as compared to samples or products produced in the past. The warranty excludes damage resulting from careless or incorrect furniture installation, potential damage from accidents such as that resulting from a fall, impact, natural disaster, fire and, in any case, all defects that cannot be attributed to defects in the manufacture of the product. Moreover, the warranty is not valid in the event that our products are disassembled, modified or repaired by anyone other than authorised poliform personnel. Damage due to poor upkeep or improper use of the product are not considered defects of manufacture. You will find useful recommendations in the instruction booklet regarding the use and care of your product. If you have any doubts or for further information, consult the Poliform reseller where your product was purchased. For any situation not expressly covered by this warranty. Legal provisions shall apply.
Poliform uses Class EPF-S E0.5 wood-based panels, the most reliable in conforming to EU standards EN120 and EN-717-2 with respect to formaldehyde release. With respect to varnish, Poliform exclusively uses polyurethane coatings free of heavy metals and volatile organic compounds (VOC) belonging to the various Classes within table A1 of the Italian Ministerial Decree of 12 july 1990 and/or Classes 1 and 2 within table D of the Italian Ministerial Decree of 12 july 1990.
Our warranty is valid for 2 years from the date of purchase and covers all manufacturing defects. The warranty period enters into force from the date printed on your receipt or sales slip. You may be asked to present proof of purchase when requesting service. The warranty is non-transferable and is valid only for the original purchaser. It covers repair or replacement of unusable or defective parts free of charge during the warranty period after inspection and acceptance by Poliform or its agent. Natural variations in the colour of the wood, changes in colour under ambient or artificial light, slight variations in dimensions owing to high humidity or dry conditions and the grain of wood, knots or other natural characteristics of wood products are not covered by the warranty. As to suede and leather, occasional natural marks, wrinkles, changes in brightness and tone, specks and slight imperfections folds due to extension after regular use, are not considered defects but are the distinctive traits of natural and authentic products. In some cases (aged-looking leather and nubuck leather, above all with light colours), these features are especially marked, as the kind of tanning for these leathers tends to point out the pureness of the product and not to cover it with painting or pressure print.
The staining effect on nubuck leather is to be considered a characteristic trait of the product. For nubuck leather, prolonged contact with the grease on our skin and hair may cause dark stains to appear over time. Some types of fabric show features due to the composition and the kind of manufacturing that aren’t to be considered as defects. For example: “staple” or “streaked” and “crumpled effect” for linen ”spotted effect” or “curl” , the ”light/dark effect” and the ”imprint effect” for velvets and chenille. In fabrics, suedes or leather, each production lot can present slight variations in colour as compared to samples or products produced in the past. The warranty excludes damage resulting from careless or incorrect furniture installation, potential damage from accidents such as that resulting from a fall, impact, natural disaster, fire and, in any case, all defects that cannot be attributed to defects in the manufacture of the product. Moreover, the warranty is not valid in the event that our products are disassembled, modified or repaired by anyone other than authorised poliform personnel. Damage due to poor upkeep or improper use of the product are not considered defects of manufacture. You will find useful recommendations in the instruction booklet regarding the use and care of your product. If you have any doubts or for further information, consult the Poliform reseller where your product was purchased. For any situation not expressly covered by this warranty. Legal provisions shall apply.
Poliform uses Class EPF-S E0.5 wood-based panels, the most reliable in conforming to EU standards EN120 and EN-717-2 with respect to formaldehyde release. With respect to varnish, Poliform exclusively uses polyurethane coatings free of heavy metals and volatile organic compounds (VOC) belonging to the various Classes within table A1 of the Italian Ministerial Decree of 12 july 1990 and/or Classes 1 and 2 within table D of the Italian Ministerial Decree of 12 july 1990.
(Acrylonitrile Butadiene Styrene) A synthetic thermosetting plastic resin with good resistance to acids. It repels dust and cannot warp. For these reasons, ABS is used in the manufacture of edges and sheets for surface coating.
A silvery, highly ductile metal. Its chief properties are resistance to corrosion, tensile strength and it is light weight. These properties are ideal for manufacturing durable yet lightweight frame components. Raw aluminium can be worked using several different processing techniques such as fusion, 20 21 forging or pressing.
Leather is a protein material derived from the hides and skins of cattle. Processing is referred to as tanning and consists of eliminating the outermost layer of skin and connective tissue (hypodermis). The most important layer is the dermis, consisting of fibrous fascicles of connective and elastic tissue. The upper portion of the dermis, called the grain, is considered to be the highest grade of leather, called “full grain”.
Panels of polyesterized particle board on the front side, faced and then lacquered on both sides with polyurethane polymer-based paint having a high molecular weight. The panels are dimensionally stable.
A hardening synthetic resin obtained from polycondensation of formaldehyde. It is a colourless, odourless resin that is resistant to water, chemicals, abrasion and heat and which has particular transparency under light.
PMMA (Polymethyl Methacrylate), a plastic material formed from polymers of methyl methacrylate, methacrylic acid ester. The extruded surface is further transformed: this step is called thermoforming, a technology that allows us to engrave the smooth sheet and to imprint the decoration. This material is resistant to breakage, shocks, blows, weather and ageing.
An engineered wood-based product composed of wood fibres or fascicles of wood fibre submitted to processing by a thermomechanical defibrator under high temperature and pressure. The fibres are held together with hardening synthetic resin.
Panel composed of wood particles with a thin layer of solid wood, called veneer, less than 0,7 mm thick.
Wood-based panels made from wood particles (shavings, wood chips, etc.) The wood particles are held together with hardening synthetic resin and then heat pressurised. Particle board panels use an assortment of less costly wood which is generally the byproduct of other processes: this is why this type of product is of interest from an ecological standpoint.
Composite plant fibre obtained from the phloem (surface bark) of linum usitatissimum, composed of approximately 70% cellulose. It is a fresh, wear-resistant and soft fibre. Linen is dyed and then finished with special techniques that make it dimensionally stable but give it a slightly stonewashed appearance that amplifies its characteristics as a natural fibre that is extremely comfortable to the touch. It is treated with a special finishing that gives it a natural, soft appearance.
Wood-based panel made up of more than 3 layers of wood layers superimposed so that the grains of adjacent layers are at a right angle.
A panel composed of wood particles and covered with a cellulose base material (paper), sheets of polymer (PVC, veneer, ABS, etc.) or with melamine resins.
Thin slices of wood between 3 and 0.30 millimetres. Peeling derives its meaning from the fact that the tree trunk is peeled using a lathe instead of a saw. The trunk is sliced lengthwise. The slices are joined together then glued and moulded on less costly wood or raw panels of any kind (multilaminates, particle board, waferboard, plywood, hollow core board). The use of wood veneer allows the manufacture of wood products with greater durability, more resistance to woodworms, greater consistency and more attention to visible parts. The use of wood veneer also satisfies today’s need for a more ecology-conscious application of wood resources.
Core board panel made by gluing two multilaminates (usually 4 mm thick) on a frame of spruce mouldings or other common wood. The external surfaces can be veneered or lacquered. Inside the interspace in the vertical mouldings, the large panels contain plywood to stiffen the surface. This method of construction allows panels to be created that add strength together with lightness, proving to be ideal, for example, for wardrobe doors.
Tecnocover is a general purpose material, made up of 20% scrap leather, 55% polyurethane and 25% cotton. Scraps from the processing of natural leather are finely chopped and mixed with rubber, latex and other synthetic aggregates. Sheets of tecnocover can undergo various finishing processes, in order to render them as similar as possible to the corresponding natural version. One specifically important process is embossing, whereby the material is impressed with a specific pattern that imitates the grain of natural leather.
Common glass is composed almost exclusively of silica, the same substance as quartz. In its purest state, glass is transparent, relatively hard, almost inert from a chemical and biological standpoint and presents a very smooth surface. Glass is available in a wide range of finishes and colours for interior decoration. It is possible to circumvent its intrinsic fragility by using chemical treatments (adding other minerals to the compound) or physical processes, such as tempering.
Glass subjected to a thermal tempering process, heated at 640° and rapidly cooled by air jets. A highly brittle sheet of glass with high residual stress and enhanced strength is obtained using this process. When broken, tempered glass shatters into pebble-like pieces without sharp edges.
(Acrylonitrile Butadiene Styrene) A synthetic thermosetting plastic resin with good resistance to acids. It repels dust and cannot warp. For these reasons, ABS is used in the manufacture of edges and sheets for surface coating.
A silvery, highly ductile metal. Its chief properties are resistance to corrosion, tensile strength and it is light weight. These properties are ideal for manufacturing durable yet lightweight frame components. Raw aluminium can be worked using several different processing techniques such as fusion, 20 21 forging or pressing.
Leather is a protein material derived from the hides and skins of cattle. Processing is referred to as tanning and consists of eliminating the outermost layer of skin and connective tissue (hypodermis). The most important layer is the dermis, consisting of fibrous fascicles of connective and elastic tissue. The upper portion of the dermis, called the grain, is considered to be the highest grade of leather, called “full grain”.
Panels of polyesterized particle board on the front side, faced and then lacquered on both sides with polyurethane polymer-based paint having a high molecular weight. The panels are dimensionally stable.
A hardening synthetic resin obtained from polycondensation of formaldehyde. It is a colourless, odourless resin that is resistant to water, chemicals, abrasion and heat and which has particular transparency under light.
PMMA (Polymethyl Methacrylate), a plastic material formed from polymers of methyl methacrylate, methacrylic acid ester. The extruded surface is further transformed: this step is called thermoforming, a technology that allows us to engrave the smooth sheet and to imprint the decoration. This material is resistant to breakage, shocks, blows, weather and ageing.
An engineered wood-based product composed of wood fibres or fascicles of wood fibre submitted to processing by a thermomechanical defibrator under high temperature and pressure. The fibres are held together with hardening synthetic resin.
Panel composed of wood particles with a thin layer of solid wood, called veneer, less than 0,7 mm thick.
Wood-based panels made from wood particles (shavings, wood chips, etc.) The wood particles are held together with hardening synthetic resin and then heat pressurised. Particle board panels use an assortment of less costly wood which is generally the byproduct of other processes: this is why this type of product is of interest from an ecological standpoint.
Composite plant fibre obtained from the phloem (surface bark) of linum usitatissimum, composed of approximately 70% cellulose. It is a fresh, wear-resistant and soft fibre. Linen is dyed and then finished with special techniques that make it dimensionally stable but give it a slightly stonewashed appearance that amplifies its characteristics as a natural fibre that is extremely comfortable to the touch. It is treated with a special finishing that gives it a natural, soft appearance.
Wood-based panel made up of more than 3 layers of wood layers superimposed so that the grains of adjacent layers are at a right angle.
A panel composed of wood particles and covered with a cellulose base material (paper), sheets of polymer (PVC, veneer, ABS, etc.) or with melamine resins.
Thin slices of wood between 3 and 0.30 millimetres. Peeling derives its meaning from the fact that the tree trunk is peeled using a lathe instead of a saw. The trunk is sliced lengthwise. The slices are joined together then glued and moulded on less costly wood or raw panels of any kind (multilaminates, particle board, waferboard, plywood, hollow core board). The use of wood veneer allows the manufacture of wood products with greater durability, more resistance to woodworms, greater consistency and more attention to visible parts. The use of wood veneer also satisfies today’s need for a more ecology-conscious application of wood resources.
Core board panel made by gluing two multilaminates (usually 4 mm thick) on a frame of spruce mouldings or other common wood. The external surfaces can be veneered or lacquered. Inside the interspace in the vertical mouldings, the large panels contain plywood to stiffen the surface. This method of construction allows panels to be created that add strength together with lightness, proving to be ideal, for example, for wardrobe doors.
Tecnocover is a general purpose material, made up of 20% scrap leather, 55% polyurethane and 25% cotton. Scraps from the processing of natural leather are finely chopped and mixed with rubber, latex and other synthetic aggregates. Sheets of tecnocover can undergo various finishing processes, in order to render them as similar as possible to the corresponding natural version. One specifically important process is embossing, whereby the material is impressed with a specific pattern that imitates the grain of natural leather.
Common glass is composed almost exclusively of silica, the same substance as quartz. In its purest state, glass is transparent, relatively hard, almost inert from a chemical and biological standpoint and presents a very smooth surface. Glass is available in a wide range of finishes and colours for interior decoration. It is possible to circumvent its intrinsic fragility by using chemical treatments (adding other minerals to the compound) or physical processes, such as tempering.
Glass subjected to a thermal tempering process, heated at 640° and rapidly cooled by air jets. A highly brittle sheet of glass with high residual stress and enhanced strength is obtained using this process. When broken, tempered glass shatters into pebble-like pieces without sharp edges.
The following instructions, broken down by material, provide the best recommendations for preserving your Poliform product for years to come. Use only recommended cleaning products and avoid harsh or abrasive detergents. Proper care will enable you to enjoy your quality Poliform product for many years.
We advise to use a neutral detergent. Avoid products containing acetone, thinners, ammonia, abrasive detergents or furniture wax. Caution: the surface of the wood is treated to resist moderate amounts of grease and dirt. In addition, surface coatings contain water-resistant and anti-yellowing agents. However, avoid exposing surfaces to scoring or high temperature.
We advise to use a neutral detergent, avoid products containing acetone, thinners, ammonia, abrasive detergents or furniture wax. Warning: during initial cleaning, the cloth may pick up some colour. This is a physiological phenomenon and is linked to the presence of paint powders that come to the surface during the drying process: once it is eliminated, you won’t see it again.
We advise to use a neutral detergent. Avoid products containing acetone, chlorine, thinner or abrasive cleaners.
Use vinegar diluted in abundant water or glass cleaning products. Warning: in the event that glass is mounted in an aluminum frame, avoid alcohol or ammonia, which may damage the frame.
We recommend to use only neutral detergent or degreaser with water, with a soft cloth. Avoid the use of alcohol-based substances (for example a detergent for cleaning windows that does not contain alcohol). We recommend the application of an antistatic spray for furniture without alcohol, to improve surface resistance. Leave to dry for 24 hours.
Use a felt or soft wool cloth. Apply leather cream only if necessary. Occasional stains can be removed if they are wiped up immediately with an absorbent cloth. Do not rub the stain but gingerly blot starting from the edge of the stain and work inwards. Avoid any type of aggressive (such as solvents) or abrasive product. Never steam clean. Do not use shoe-cleaning products.
Routine cleaning can be done using a vacuum cleaner with a soft brush attachment, being as gentle as possible. After vacuuming, you can wipe down tecnocover surfaces with a cloth moistened with lukewarm water and carefully wrung dry. Any stains should be removed as quickly as possible, using an absorbent cloth. Do not rub too energetically. We recommend a conditioning treatment every six months, using specific products readily available on the market.
Occasionally dust the covering with a soft, neutral cotton cloth. For stains, use a damp cotton cloth (not wet) and neutral detergent only, dab the area, and if necessary, wipe without rubbing excessively but rather in a circular motion working from the outside of the stain inwards, then dry the area with a hair dryer at a distance of approximately 30-40 cm to prevent streaks.
Lubricate with any product widely available on the market. Use lubricant periodically on hinges and drawer slides before cleaning to remove possible dust. For metal parts, simply wipe down periodically with a damp cloth. Avoid any kind of abrasive cleaning product.
Poliform recommends that you do not dispose of your product in the outdoors. Because of our manufacturing techology and the routine use of recyclable materials, discarded Poliform products can be re-used in the manufacturing process. For this reason, drop off your Poliform product at the waste disposal centers within your municipality.
To facilitate the collection, reuse, recovery and recycling of packaging, we inform you that the packaging is composed as follows: PAP20 carton, PS 06 polystyrene, PELD 04 expanded polyethylene (down), Profiles in Systempack PELD 04.
The following instructions, broken down by material, provide the best recommendations for preserving your Poliform product for years to come. Use only recommended cleaning products and avoid harsh or abrasive detergents. Proper care will enable you to enjoy your quality Poliform product for many years.
We advise to use a neutral detergent. Avoid products containing acetone, thinners, ammonia, abrasive detergents or furniture wax. Caution: the surface of the wood is treated to resist moderate amounts of grease and dirt. In addition, surface coatings contain water-resistant and anti-yellowing agents. However, avoid exposing surfaces to scoring or high temperature.
We advise to use a neutral detergent, avoid products containing acetone, thinners, ammonia, abrasive detergents or furniture wax. Warning: during initial cleaning, the cloth may pick up some colour. This is a physiological phenomenon and is linked to the presence of paint powders that come to the surface during the drying process: once it is eliminated, you won’t see it again.
We advise to use a neutral detergent. Avoid products containing acetone, chlorine, thinner or abrasive cleaners.
Use vinegar diluted in abundant water or glass cleaning products. Warning: in the event that glass is mounted in an aluminum frame, avoid alcohol or ammonia, which may damage the frame.
We recommend to use only neutral detergent or degreaser with water, with a soft cloth. Avoid the use of alcohol-based substances (for example a detergent for cleaning windows that does not contain alcohol). We recommend the application of an antistatic spray for furniture without alcohol, to improve surface resistance. Leave to dry for 24 hours.
Use a felt or soft wool cloth. Apply leather cream only if necessary. Occasional stains can be removed if they are wiped up immediately with an absorbent cloth. Do not rub the stain but gingerly blot starting from the edge of the stain and work inwards. Avoid any type of aggressive (such as solvents) or abrasive product. Never steam clean. Do not use shoe-cleaning products.
Routine cleaning can be done using a vacuum cleaner with a soft brush attachment, being as gentle as possible. After vacuuming, you can wipe down tecnocover surfaces with a cloth moistened with lukewarm water and carefully wrung dry. Any stains should be removed as quickly as possible, using an absorbent cloth. Do not rub too energetically. We recommend a conditioning treatment every six months, using specific products readily available on the market.
Occasionally dust the covering with a soft, neutral cotton cloth. For stains, use a damp cotton cloth (not wet) and neutral detergent only, dab the area, and if necessary, wipe without rubbing excessively but rather in a circular motion working from the outside of the stain inwards, then dry the area with a hair dryer at a distance of approximately 30-40 cm to prevent streaks.
Lubricate with any product widely available on the market. Use lubricant periodically on hinges and drawer slides before cleaning to remove possible dust. For metal parts, simply wipe down periodically with a damp cloth. Avoid any kind of abrasive cleaning product.
Poliform recommends that you do not dispose of your product in the outdoors. Because of our manufacturing techology and the routine use of recyclable materials, discarded Poliform products can be re-used in the manufacturing process. For this reason, drop off your Poliform product at the waste disposal centers within your municipality.
To facilitate the collection, reuse, recovery and recycling of packaging, we inform you that the packaging is composed as follows: PAP20 carton, PS 06 polystyrene, PELD 04 expanded polyethylene (down), Profiles in Systempack PELD 04.
Material: panel of wooden particles faced with melamine
Thickness: 25 mm
Edge: ABS
Material: panel of wooden particles
Inner side finish: melamine
External side:
Veneered
Faced with melamine
Faced with melamine lacquered
Panel of wooden particles with white mirror
Panel of wooden particles with hide applied
Panel of wooden particles with tecnocover grain applied
Edge: ABS
Thickness: 25 mm
Material: panel of wooden particles faced with melamine
Thickness: 35 mm
Edge: ABS
Features: We don’t recommend to apply doors later.
Material: aluminium painted frame
Thickness: 25 mm
Material: aluminium painted frame Glass: tempered glass
Thickness frame: 25 mm
Thickness glass: 4 mm
Material: panel of wooden particles faced with melamine
Thickness: 35 mm
Edge: ABS
Material: aluminium painted
Material: aluminium painted
Material: panel of wooden particles faced with melamine
Thickness: 10 mm
Materiale: tempered glass
Thickness: 5 mm
Material: panel of wooden particles faced with methacrylate Thickness: 10 mm
Material: panel of wooden particles faced with melamine and lacquered
Thickness: 10 mm
Material: panel of wooden particles faced with melamine
Spessore: 35 mm
Edge: ABS
Material: panel of wooden particles faced with melamine
Thickness: 35 mm
Lateral and back edge: ABS
Front edge: aluminium painted
Shelf/chest of drawers top in tecnocover grain with front
Material: panel of wooden particles faced with melamine covered with tecnocover grain Thickness: 35 mm
Frame: aluminium painted
Material: panel of wooden particles faced with melamine covered with tecnocover grain
Thickness: 35 mm
Lateral and rear edge: ABS
Front edge: aluminium painted
Material: tempered glass
Thickness: shelf 35 mm – glass 4 mm
Frame: aluminium painted
Material: panel of wooden particles faced with melamine
Thickness: 35 mm
Lateral and rear edge: ABS
Front edge: aluminium painted 4 mm
Features: 1-2 painted skirting profiles 4 mm (according to the depth)
Material: panel in medium density fibre, faced with melamine
Thickness: 35 mm
Material: panel of wooden particles faced with melamine
Thickness: 15 mm
Rdge: ABS
Features: supplied with PVC back spacers
Material: panel of wooden particles faced with melamine Thickness: 25 mm
Edge: ABS
Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain
Material: glass
Thickness: 4 mm
Frame: panel in medium density fibre faced with melamine
Features: handle in painted aluminium
Material: panel of wooden particles faced with methacrylate
Thickness: 25 mm
Edge: ABS
Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain
Material: panel of wooden particles faced with melamine
Thickness: 14 mm for the sides, 12 mm for the back and 6 mm for the bottom
Edge: ABS
Features: full extraction metal runners with ball bearings and soft closing
Front: panel of wooden particles faced with melamine
Thickness: 4 mm sides, 15 mm back and 15 mm bottom
Bottom: panel of wooden particles faced with melamine or covered in tecnocover grain
Sides: aluminium painted
Edge: ABS
Features: the “shoes holder” option is supplied with round bars in aluminium painted
Front: panel of wooden particles faced with melamine
Edge: ABS
Sides: panel in medium density fibre, faced with melamine
Back: solid wood panel faced with melamine
Features: it can be accessorized with bars, tray with partition
Structure: panel of wooden particles faced with melamine
Shelves: panel of wooden particles faced with melamine or tecnocover grain
Thickness: 15 mm
Edge: ABS
Features: it can be accessorized with boxes
Structure: cardboard covered in fabric
Material: lacquered panel in medium density fibre
Thickness: 10 mm
Bottom: panel of wooden particles faced with melamine covered in tecnocover grain Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments
Material: fixed structure: c-shaped metal sheet covered in tecnocover grain
Material: extractable structure: lacquered panel in medium density fibre
Thickness: fixed structure 3 mm
Thickness: extractable structure 10 mm
Bottom: extractable structure: panel of wooden particles faced with melamine
Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments
Structure:panel in medium density fibre faced with melamine
Fronts: panel in medium density fibre faced with melamine and lacquered
Top: fumé glass with silk-screen printing (4 mm)
Features: drawers bottoms covered with tecnocover grain, equipped with inner light
Material: panel of wooden particles faced with melamine
Thickness: 25 mm
Edge: ABS same finishing of the front
Material: panel of wooden particles faced with melamine
Thickness: 25 mm
Edge: ABS same finishing of the front
Material: panel of wooden particles faced with melamine
Thickness: 25 mm
Edge: ABS in contrast colour
Material: panel of wooden particles faced with melamine
Thickness: 25 mm Edge: ABS same finishing of the front
Material: panel of wooden particles faced with melamine lacquered colours Thickness: 25 mm
Vertical profile: aluminium painted
Material: panel of wooden particles faced with melamine
Finishing: lacquered colours
Thickness: 25 mm
Material: panel of wooden particles veneered
Edge: veneered
Thickness: 25 mm
Material: panel of wooden particles faced with melamine
Finishing: lacquered colours
Plus handle: aluminium painted
Thickness: 25 mm
Material: panel of wooden particles veneered
Edge: veneered
Plus handle: aluminium painted
Thickness: 25 mm
Material: tempered glass thickness 4 mm
Aluminium profile: painted colours
Plus handle: painted aluminium
Thickness: 28 mm
Material: tempered glass thickness 4 mm
Frame: aluminium painted
Thickness: 42 mm
Material: tempered glass thickness 4 mm
Profile: aluminium painted
Thickness: 28 mm
Material: panel of wooden particles with applied glass/mirror
Profile: aluminium painted
Thickness: 25 mm
Materiale: pannello di particelle di legno
Finitura: tecnocover grain
Telaio: alluminio verniciato
Maniglia Cover: alluminio verniciato e rivestita in tecnocover grain
Spessore: 25 mm
Material: panel of wooden particles
Finishing: fabric
Frame: aluminium painted
Fitted handle: aluminium painted
Thickness: 25 mm
Material: panel of wooden particles with glass
Frame: aluminium painted
Fitted handle: aluminium painted
Thickness: 25 mm
Material: honeycomb panel covered
Finishing: hide
Bangkok handle: aluminium painted
Thickness: 30 mm
Material: panel of wooden particles veneered
Edge: veneered
Match handle: aluminium painted with wooden insert
Thickness: 25 mm
Material: panel of wooden particles
Finish: tecnocover grain colours
Frame: painted aluminium
Match handle: painted aluminium and covered in tecnocover grain
Thickness: 25 mm
Material: panel of wooden particles
Finish: tecnocover grain colours
Frame: painted aluminium
Match handle: painted aluminium and covered in tecnocover grain
Thickness: 25 mm
Material: panel of wooden particles faced with melamine
Thickness: 25 mm
Edge: ABS
Material: panel of wooden particles
Inner side finish: melamine
External side:
Veneered
Faced with melamine
Faced with melamine lacquered
Panel of wooden particles with white mirror
Panel of wooden particles with hide applied
Panel of wooden particles with tecnocover grain applied
Edge: ABS
Thickness: 25 mm
Material: panel of wooden particles faced with melamine
Thickness: 35 mm
Edge: ABS
Features: We don’t recommend to apply doors later.
Material: aluminium painted frame
Thickness: 25 mm
Material: aluminium painted frame Glass: tempered glass
Thickness frame: 25 mm
Thickness glass: 4 mm
Material: panel of wooden particles faced with melamine
Thickness: 35 mm
Edge: ABS
Material: aluminium painted
Material: aluminium painted
Material: panel of wooden particles faced with melamine
Thickness: 10 mm
Materiale: tempered glass
Thickness: 5 mm
Material: panel of wooden particles faced with methacrylate Thickness: 10 mm
Material: panel of wooden particles faced with melamine and lacquered
Thickness: 10 mm
Material: panel of wooden particles faced with melamine
Spessore: 35 mm
Edge: ABS
Material: panel of wooden particles faced with melamine
Thickness: 35 mm
Lateral and back edge: ABS
Front edge: aluminium painted
Shelf/chest of drawers top in tecnocover grain with front
Material: panel of wooden particles faced with melamine covered with tecnocover grain Thickness: 35 mm
Frame: aluminium painted
Material: panel of wooden particles faced with melamine covered with tecnocover grain
Thickness: 35 mm
Lateral and rear edge: ABS
Front edge: aluminium painted
Material: tempered glass
Thickness: shelf 35 mm – glass 4 mm
Frame: aluminium painted
Material: panel of wooden particles faced with melamine
Thickness: 35 mm
Lateral and rear edge: ABS
Front edge: aluminium painted 4 mm
Features: 1-2 painted skirting profiles 4 mm (according to the depth)
Material: panel in medium density fibre, faced with melamine
Thickness: 35 mm
Material: panel of wooden particles faced with melamine
Thickness: 15 mm
Rdge: ABS
Features: supplied with PVC back spacers
Material: panel of wooden particles faced with melamine Thickness: 25 mm
Edge: ABS
Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain
Material: glass
Thickness: 4 mm
Frame: panel in medium density fibre faced with melamine
Features: handle in painted aluminium
Material: panel of wooden particles faced with methacrylate
Thickness: 25 mm
Edge: ABS
Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain
Material: panel of wooden particles faced with melamine
Thickness: 14 mm for the sides, 12 mm for the back and 6 mm for the bottom
Edge: ABS
Features: full extraction metal runners with ball bearings and soft closing
Front: panel of wooden particles faced with melamine
Thickness: 4 mm sides, 15 mm back and 15 mm bottom
Bottom: panel of wooden particles faced with melamine or covered in tecnocover grain
Sides: aluminium painted
Edge: ABS
Features: the “shoes holder” option is supplied with round bars in aluminium painted
Front: panel of wooden particles faced with melamine
Edge: ABS
Sides: panel in medium density fibre, faced with melamine
Back: solid wood panel faced with melamine
Features: it can be accessorized with bars, tray with partition
Structure: panel of wooden particles faced with melamine
Shelves: panel of wooden particles faced with melamine or tecnocover grain
Thickness: 15 mm
Edge: ABS
Features: it can be accessorized with boxes
Structure: cardboard covered in fabric
Material: lacquered panel in medium density fibre
Thickness: 10 mm
Bottom: panel of wooden particles faced with melamine covered in tecnocover grain Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments
Material: fixed structure: c-shaped metal sheet covered in tecnocover grain
Material: extractable structure: lacquered panel in medium density fibre
Thickness: fixed structure 3 mm
Thickness: extractable structure 10 mm
Bottom: extractable structure: panel of wooden particles faced with melamine
Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments
Structure:panel in medium density fibre faced with melamine
Fronts: panel in medium density fibre faced with melamine and lacquered
Top: fumé glass with silk-screen printing (4 mm)
Features: drawers bottoms covered with tecnocover grain, equipped with inner light
Material: panel of wooden particles faced with melamine
Thickness: 25 mm
Edge: ABS same finishing of the front
Material: panel of wooden particles faced with melamine
Thickness: 25 mm
Edge: ABS same finishing of the front
Material: panel of wooden particles faced with melamine
Thickness: 25 mm
Edge: ABS in contrast colour
Material: panel of wooden particles faced with melamine
Thickness: 25 mm Edge: ABS same finishing of the front
Material: panel of wooden particles faced with melamine lacquered colours Thickness: 25 mm
Vertical profile: aluminium painted
Material: panel of wooden particles faced with melamine
Finishing: lacquered colours
Thickness: 25 mm
Material: panel of wooden particles veneered
Edge: veneered
Thickness: 25 mm
Material: panel of wooden particles faced with melamine
Finishing: lacquered colours
Plus handle: aluminium painted
Thickness: 25 mm
Material: panel of wooden particles veneered
Edge: veneered
Plus handle: aluminium painted
Thickness: 25 mm
Material: tempered glass thickness 4 mm
Aluminium profile: painted colours
Plus handle: painted aluminium
Thickness: 28 mm
Material: tempered glass thickness 4 mm
Frame: aluminium painted
Thickness: 42 mm
Material: tempered glass thickness 4 mm
Profile: aluminium painted
Thickness: 28 mm
Material: panel of wooden particles with applied glass/mirror
Profile: aluminium painted
Thickness: 25 mm
Materiale: pannello di particelle di legno
Finitura: tecnocover grain
Telaio: alluminio verniciato
Maniglia Cover: alluminio verniciato e rivestita in tecnocover grain
Spessore: 25 mm
Material: panel of wooden particles
Finishing: fabric
Frame: aluminium painted
Fitted handle: aluminium painted
Thickness: 25 mm
Material: panel of wooden particles with glass
Frame: aluminium painted
Fitted handle: aluminium painted
Thickness: 25 mm
Material: honeycomb panel covered
Finishing: hide
Bangkok handle: aluminium painted
Thickness: 30 mm
Material: panel of wooden particles veneered
Edge: veneered
Match handle: aluminium painted with wooden insert
Thickness: 25 mm
Material: panel of wooden particles
Finish: tecnocover grain colours
Frame: painted aluminium
Match handle: painted aluminium and covered in tecnocover grain
Thickness: 25 mm
Material: panel of wooden particles
Finish: tecnocover grain colours
Frame: painted aluminium
Match handle: painted aluminium and covered in tecnocover grain
Thickness: 25 mm
Structure: panel of wooden particles faced with melamine panel of wooden particles with applied glass/mirror
Thickness: 25 mm
Edge: ABS
Features: supplied with aluminum profile
with rack to hook shelves. Adjustable feet.
Structure: panel of wooden particles faced with melamine matt lacquered colours
Thickness: 25 mm
Features: supplied with profile in aluminium painted with rack for shelves
fixing. Adjustable feet.
Structure: panel of wooden particles faced with methacrylate
Thickness: 25 mm
Features: supplied with profile in aluminium painted with rack for shelves
fixing. Adjustable feet.
Structure: panel of wooden particles with glass or mirror
Thickness: 25 mm
Features: supplied with profile in aluminium painted with rack for shelves fixing. Adjustable feet.
Material: panel of wooden particles faced with melamine
Edge: ABS
Thickness: 35 mm
Features: supplied with iron plates painted for back panel fixing.
Material: panel of wooden particles faced with melamine
Thickness: 35 mm
Lateral edge: ABS
Front edge: aluminium painted
Features: supplied with iron plates painted for back panel fixing
Material: panel of wooden particles faced with melamine
Finishing: tecnocover grain
Thickness: 35 mm
Front: aluminium painted
Features: supplied with iron plates painted for back panel fixing
Material: panel of wooden particles faced with melamine
Finishing: tecnocover grain
Thickness: 35 mm
Front: aluminium painted
Features: supplied with iron plates painted for back panel fixing
Material: tempered glass
Thickness: 35 mm – glass 4 mm
Frame: aluminium painted
Material: panel of wooden particles faced with melamine
Thickness: 35 mm
Lateral and rear edge: ABS
Front edge: aluminium painted 4 mm
Features: painted shoe profile 4 mm
Material: panel of wooden particles faced with melamine
Edge: ABS
Thickness: 35 mm
Features: supplied with plinth in painted aluminium and adjustable feet
Material: painted aluminium
Material: painted aluminium
Material: panel of wooden particles faced with melamine
Thickness: 10/15/25 mm
Edge: ABS
Features: available also with wheels
Material: panel of wooden particles faced with melamine, MDF panel with melamine
Thickness: 25 mm
Edge: ABS
Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain
Material: glass Thickness: 4 mm Frame: birch plywood melamine
Features: handle in painted aluminium
Material: panel of wooden particles faced with methacrylate Thickness: 25 mm Edge: ABS Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain
Front: panel of wooden particles faced with melamine
Edge: ABS Sides: panel in medium density fibre, faced with melamine
Back: solid wood panel faced with melamine Features: it can be accessorized with bars/tray with partitions
Material: panel of wooden particles faced with melamine Thickness: 14 mm for the sides, 12 mm for the back and 6 mm for the bottom Edge: ABS
Features: full extraction metal runners with ball bearings and soft closing
Front: panel of wooden particles faced with melamine Thickness: 4 mm sides, 15 mm back panel and 15 mm bottom Bottom: panel of wooden particles faced with melamine or covered in tecnocover grain Sides: aluminium painted Edge: ABS
Features: the “shoes holder” option is supplied with round bars in aluminium painted
Material: mat lacquered panel in medium density fibre Thickness: 10 mm Bottom: panel of wooden particles faced with melamine covered in tecnocover grain Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments
Material: fixed structure: c-shaped metal sheet covered in tecnocover grain Material: extractable structure: mat lacquered panel in medium density fibre Thickness: fixed structure 3 mm, extractable structure 10 mm Bottom: extractable structure: panel of wooden particles faced with melamine Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments
Structure: panel of wooden particles faced with melamine Shelves: panel of wooden particles faced with melamine or covered in tecnocover grain Thickness: 15 mm Edge: ABS Features: it can be equipped with boxes
Structure: cardboard covered in fabric
Structure: panel in medium density fibre faced with melamine Front: panel in medium density fibre faced with melamine and lacquered Top: glass fumé with silkscreen printing (4 mm) Features: drawers bottom covered in tecnocover grain accessorized with inner light
Structure: panel of wooden particles faced with melamine panel of wooden particles with applied glass/mirror
Thickness: 25 mm
Edge: ABS
Features: supplied with aluminum profile
with rack to hook shelves. Adjustable feet.
Structure: panel of wooden particles faced with melamine matt lacquered colours
Thickness: 25 mm
Features: supplied with profile in aluminium painted with rack for shelves
fixing. Adjustable feet.
Structure: panel of wooden particles faced with methacrylate
Thickness: 25 mm
Features: supplied with profile in aluminium painted with rack for shelves
fixing. Adjustable feet.
Structure: panel of wooden particles with glass or mirror
Thickness: 25 mm
Features: supplied with profile in aluminium painted with rack for shelves fixing. Adjustable feet.
Material: panel of wooden particles faced with melamine
Edge: ABS
Thickness: 35 mm
Features: supplied with iron plates painted for back panel fixing.
Material: panel of wooden particles faced with melamine
Thickness: 35 mm
Lateral edge: ABS
Front edge: aluminium painted
Features: supplied with iron plates painted for back panel fixing
Material: panel of wooden particles faced with melamine
Finishing: tecnocover grain
Thickness: 35 mm
Front: aluminium painted
Features: supplied with iron plates painted for back panel fixing
Material: panel of wooden particles faced with melamine
Finishing: tecnocover grain
Thickness: 35 mm
Front: aluminium painted
Features: supplied with iron plates painted for back panel fixing
Material: tempered glass
Thickness: 35 mm – glass 4 mm
Frame: aluminium painted
Material: panel of wooden particles faced with melamine
Thickness: 35 mm
Lateral and rear edge: ABS
Front edge: aluminium painted 4 mm
Features: painted shoe profile 4 mm
Material: panel of wooden particles faced with melamine
Edge: ABS
Thickness: 35 mm
Features: supplied with plinth in painted aluminium and adjustable feet
Material: painted aluminium
Material: painted aluminium
Material: panel of wooden particles faced with melamine
Thickness: 10/15/25 mm
Edge: ABS
Features: available also with wheels
Material: panel of wooden particles faced with melamine, MDF panel with melamine
Thickness: 25 mm
Edge: ABS
Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain
Material: glass Thickness: 4 mm Frame: birch plywood melamine
Features: handle in painted aluminium
Material: panel of wooden particles faced with methacrylate Thickness: 25 mm Edge: ABS Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain
Front: panel of wooden particles faced with melamine
Edge: ABS Sides: panel in medium density fibre, faced with melamine
Back: solid wood panel faced with melamine Features: it can be accessorized with bars/tray with partitions
Material: panel of wooden particles faced with melamine Thickness: 14 mm for the sides, 12 mm for the back and 6 mm for the bottom Edge: ABS
Features: full extraction metal runners with ball bearings and soft closing
Front: panel of wooden particles faced with melamine Thickness: 4 mm sides, 15 mm back panel and 15 mm bottom Bottom: panel of wooden particles faced with melamine or covered in tecnocover grain Sides: aluminium painted Edge: ABS
Features: the “shoes holder” option is supplied with round bars in aluminium painted
Material: mat lacquered panel in medium density fibre Thickness: 10 mm Bottom: panel of wooden particles faced with melamine covered in tecnocover grain Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments
Material: fixed structure: c-shaped metal sheet covered in tecnocover grain Material: extractable structure: mat lacquered panel in medium density fibre Thickness: fixed structure 3 mm, extractable structure 10 mm Bottom: extractable structure: panel of wooden particles faced with melamine Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments
Structure: panel of wooden particles faced with melamine Shelves: panel of wooden particles faced with melamine or covered in tecnocover grain Thickness: 15 mm Edge: ABS Features: it can be equipped with boxes
Structure: cardboard covered in fabric
Structure: panel in medium density fibre faced with melamine Front: panel in medium density fibre faced with melamine and lacquered Top: glass fumé with silkscreen printing (4 mm) Features: drawers bottom covered in tecnocover grain accessorized with inner light
Material: aluminium painted Thickness: 32 mm Features: upper and lower adjustments
Material: panel of wooden particles faced with melamine Thickness: 35 mm Lateral: edge ABS Front: aluminium painted Features: supplied with painted iron plates to attach to the upright
Material: panel of wooden particles faced with melamine
Finishing: tecnocover grain
Thickness: 35 mm
Frame: aluminium painted Features: supplied with painted iron plates to attach to the upright
Material: glass fumé Thickness: shelf 35 mm (glass 4 mm) Frame: aluminium painted features: supplied with painted iron plates to attach to the upright
Material: panel of wooden particles faced with melamine Thickness: 15 mm – 25 mm back panel Edge: ABS
Material: panel of wooden particles faced with melamine Thickness: 25 mm Edge: ABS Features: Track handle painted aluminium, Step handle painted aluminium or tecnocover grain
Material: glass reflecting fumé Thickness: front 25 mm (glass 4 mm) Frame: panel in medium density fibre faced with melamine Features: handle in painted aluminium
Material: panel of wooden particles in melamine faced with methacrylate Thickness: 25 mm Edge: ABS Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain
Material: panel of wooden particles faced with melamine Thickness: 14 mm sides, 12 mm back panel and 6 mm bottom Edge: ABS Features: metal runners with ball bearings and soft closing
Front: panel of wooden particles faced with melamine Thickness: 4 mm sides, 15 mm back panel and 15 mm bottom Bottom: panel of wooden particles faced with melamine or covered in tecnocover grain Sides rails: panel of wooden particles faced with melamine Edge: ABS Features: in the “shoe shelf” option it is supplied with small bars
Front: panel of wooden particles faced with melamine Edge: ABS Spondine: panel in medium density fibre faced with melamine Back panel: panel in solid wood with melamine Features: it can be equipped with trousers hanger, tray with partition elements
Structure: panel of wooden particles faced with melamine Shelves: panel of wooden particles faced with melamine or tecnocover grain Thickness: 15 mm Edge: ABS Features: it can be equipped with boxes
Structure: panel in medium density fibre faced with melamine Fronts: panel in medium density fibre faced with glossy melamine Top: glass fumé with silkscreen printing (4 mm) Features: drawers bottom covered in tecnocover grain colours equipped with inner light
Material: aluminium painted Thickness: 32 mm Features: upper and lower adjustments
Material: panel of wooden particles faced with melamine Thickness: 35 mm Lateral: edge ABS Front: aluminium painted Features: supplied with painted iron plates to attach to the upright
Material: panel of wooden particles faced with melamine
Finishing: tecnocover grain
Thickness: 35 mm
Frame: aluminium painted Features: supplied with painted iron plates to attach to the upright
Material: glass fumé Thickness: shelf 35 mm (glass 4 mm) Frame: aluminium painted features: supplied with painted iron plates to attach to the upright
Material: panel of wooden particles faced with melamine Thickness: 15 mm – 25 mm back panel Edge: ABS
Material: panel of wooden particles faced with melamine Thickness: 25 mm Edge: ABS Features: Track handle painted aluminium, Step handle painted aluminium or tecnocover grain
Material: glass reflecting fumé Thickness: front 25 mm (glass 4 mm) Frame: panel in medium density fibre faced with melamine Features: handle in painted aluminium
Material: panel of wooden particles in melamine faced with methacrylate Thickness: 25 mm Edge: ABS Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain
Material: panel of wooden particles faced with melamine Thickness: 14 mm sides, 12 mm back panel and 6 mm bottom Edge: ABS Features: metal runners with ball bearings and soft closing
Front: panel of wooden particles faced with melamine Thickness: 4 mm sides, 15 mm back panel and 15 mm bottom Bottom: panel of wooden particles faced with melamine or covered in tecnocover grain Sides rails: panel of wooden particles faced with melamine Edge: ABS Features: in the “shoe shelf” option it is supplied with small bars
Front: panel of wooden particles faced with melamine Edge: ABS Spondine: panel in medium density fibre faced with melamine Back panel: panel in solid wood with melamine Features: it can be equipped with trousers hanger, tray with partition elements
Structure: panel of wooden particles faced with melamine Shelves: panel of wooden particles faced with melamine or tecnocover grain Thickness: 15 mm Edge: ABS Features: it can be equipped with boxes
Structure: panel in medium density fibre faced with melamine Fronts: panel in medium density fibre faced with glossy melamine Top: glass fumé with silkscreen printing (4 mm) Features: drawers bottom covered in tecnocover grain colours equipped with inner light
リンクをクリックすると、poliform.com のウェブサイトへ移動します。コーポレートサイトにて、Poliformの世界、スペシャルプロジェクト、最新ニュース、そして世界各地で開催されるイベントをご覧ください。
