Night Systems

  • Our warranty is valid for 2 years from the date of purchase and covers all manufacturing defects. The warranty period enters into force from the date printed on your receipt or sales slip. You may be asked to present proof of purchase when requesting service. The warranty is non-transferable and is valid only for the original purchaser. It covers repair or replacement of unusable or defective parts free of charge during the warranty period after inspection and acceptance by Poliform or its agent. Natural variations in the colour of the wood, changes in colour under ambient or artificial light, slight variations in dimensions owing to high humidity or dry conditions and the grain of wood, knots or other natural characteristics of wood products are not covered by the warranty. As to suede and leather, occasional natural marks, wrinkles, changes in brightness and tone, specks and slight imperfections folds due to extension after regular use, are not considered defects but are the distinctive traits of natural and authentic products. In some cases (aged-looking leather and nubuck leather, above all with light colours), these features are especially marked, as the kind of tanning for these leathers tends to point out the pureness of the product and not to cover it with painting or pressure print.

  • The staining effect on nubuck leather is to be considered a characteristic trait of the product. For nubuck leather, prolonged contact with the grease on our skin and hair may cause dark stains to appear over time. Some types of fabric show features due to the composition and the kind of manufacturing that aren’t to be considered as defects. For example: “staple” or “streaked” and “crumpled effect” for linen ”spotted effect” or “curl” , the ”light/dark effect” and the ”imprint effect” for velvets and chenille. In fabrics, suedes or leather, each production lot can present slight variations in colour as compared to samples or products produced in the past. The warranty excludes damage resulting from careless or incorrect furniture installation, potential damage from accidents such as that resulting from a fall, impact, natural disaster, fire and, in any case, all defects that cannot be attributed to defects in the manufacture of the product. Moreover, the warranty is not valid in the event that our products are disassembled, modified or repaired by anyone other than authorised poliform personnel. Damage due to poor upkeep or improper use of the product are not considered defects of manufacture. You will find useful recommendations in the instruction booklet regarding the use and care of your product. If you have any doubts or for further information, consult the Poliform reseller where your product was purchased. For any situation not expressly covered by this warranty. Legal provisions shall apply.

  • Poliform uses Class EPF-S E0.5 wood-based panels, the most reliable in conforming to EU standards EN120 and EN-717-2 with respect to formaldehyde release. With respect to varnish, Poliform exclusively uses polyurethane coatings free of heavy metals and volatile organic compounds (VOC) belonging to the various Classes within table A1 of the Italian Ministerial Decree of 12 july 1990 and/or Classes 1 and 2 within table D of the Italian Ministerial Decree of 12 july 1990.

  • Our warranty is valid for 2 years from the date of purchase and covers all manufacturing defects. The warranty period enters into force from the date printed on your receipt or sales slip. You may be asked to present proof of purchase when requesting service. The warranty is non-transferable and is valid only for the original purchaser. It covers repair or replacement of unusable or defective parts free of charge during the warranty period after inspection and acceptance by Poliform or its agent. Natural variations in the colour of the wood, changes in colour under ambient or artificial light, slight variations in dimensions owing to high humidity or dry conditions and the grain of wood, knots or other natural characteristics of wood products are not covered by the warranty. As to suede and leather, occasional natural marks, wrinkles, changes in brightness and tone, specks and slight imperfections folds due to extension after regular use, are not considered defects but are the distinctive traits of natural and authentic products. In some cases (aged-looking leather and nubuck leather, above all with light colours), these features are especially marked, as the kind of tanning for these leathers tends to point out the pureness of the product and not to cover it with painting or pressure print.

  • The staining effect on nubuck leather is to be considered a characteristic trait of the product. For nubuck leather, prolonged contact with the grease on our skin and hair may cause dark stains to appear over time. Some types of fabric show features due to the composition and the kind of manufacturing that aren’t to be considered as defects. For example: “staple” or “streaked” and “crumpled effect” for linen ”spotted effect” or “curl” , the ”light/dark effect” and the ”imprint effect” for velvets and chenille. In fabrics, suedes or leather, each production lot can present slight variations in colour as compared to samples or products produced in the past. The warranty excludes damage resulting from careless or incorrect furniture installation, potential damage from accidents such as that resulting from a fall, impact, natural disaster, fire and, in any case, all defects that cannot be attributed to defects in the manufacture of the product. Moreover, the warranty is not valid in the event that our products are disassembled, modified or repaired by anyone other than authorised poliform personnel. Damage due to poor upkeep or improper use of the product are not considered defects of manufacture. You will find useful recommendations in the instruction booklet regarding the use and care of your product. If you have any doubts or for further information, consult the Poliform reseller where your product was purchased. For any situation not expressly covered by this warranty. Legal provisions shall apply.

  • Poliform uses Class EPF-S E0.5 wood-based panels, the most reliable in conforming to EU standards EN120 and EN-717-2 with respect to formaldehyde release. With respect to varnish, Poliform exclusively uses polyurethane coatings free of heavy metals and volatile organic compounds (VOC) belonging to the various Classes within table A1 of the Italian Ministerial Decree of 12 july 1990 and/or Classes 1 and 2 within table D of the Italian Ministerial Decree of 12 july 1990.

  • ABS

    (Acrylonitrile Butadiene Styrene) A synthetic thermosetting plastic resin with good resistance to acids. It repels dust and cannot warp. For these reasons, ABS is used in the manufacture of edges and sheets for surface coating.

  • Aluminum

    A silvery, highly ductile metal. Its chief properties are resistance to corrosion, tensile strength and it is light weight. These properties are ideal for manufacturing durable yet lightweight frame components. Raw aluminium can be worked using several different processing techniques such as fusion, 20 21 forging or pressing.

  • Leather

    Leather is a protein material derived from the hides and skins of cattle. Processing is referred to as tanning and consists of eliminating the outermost layer of skin and connective tissue (hypodermis). The most important layer is the dermis, consisting of fibrous fascicles of connective and elastic tissue. The upper portion of the dermis, called the grain, is considered to be the highest grade of leather, called “full grain”.

  • Glossy/matt/semi-gloss lacqueredi

    Panels of polyesterized particle board on the front side, faced and then lacquered on both sides with polyurethane polymer-based paint having a high molecular weight. The panels are dimensionally stable.

  • Melamine

    A hardening synthetic resin obtained from polycondensation of formaldehyde. It is a colourless, odourless resin that is resistant to water, chemicals, abrasion and heat and which has particular transparency under light.

  • Methacrylate

    PMMA (Polymethyl Methacrylate), a plastic material formed from polymers of methyl methacrylate, methacrylic acid ester. The extruded surface is further transformed: this step is called thermoforming, a technology that allows us to engrave the smooth sheet and to imprint the decoration. This material is resistant to breakage, shocks, blows, weather and ageing.

  • Medium-density fibreboard (MDF)

    An engineered wood-based product composed of wood fibres or fascicles of wood fibre submitted to processing by a thermomechanical defibrator under high temperature and pressure. The fibres are held together with hardening synthetic resin.

  • Veneered particle board panel

    Panel composed of wood particles with a thin layer of solid wood, called veneer, less than 0,7 mm thick.

  • Particle board panels

    Wood-based panels made from wood particles (shavings, wood chips, etc.) The wood particles are held together with hardening synthetic resin and then heat pressurised. Particle board panels use an assortment of less costly wood which is generally the byproduct of other processes: this is why this type of product is of interest from an ecological standpoint.

  • Linen panel

    Composite plant fibre obtained from the phloem (surface bark) of linum usitatissimum, composed of approximately 70% cellulose. It is a fresh, wear-resistant and soft fibre. Linen is dyed and then finished with special techniques that make it dimensionally stable but give it a slightly stonewashed appearance that amplifies its characteristics as a natural fibre that is extremely comfortable to the touch. It is treated with a special finishing that gives it a natural, soft appearance.

  • Multilaminate board

    Wood-based panel made up of more than 3 layers of wood layers superimposed so that the grains of adjacent layers are at a right angle.

  • Aluminum

    A panel composed of wood particles and covered with a cellulose base material (paper), sheets of polymer (PVC, veneer, ABS, etc.) or with melamine resins.

  • Methacrylate

    Thin slices of wood between 3 and 0.30 millimetres. Peeling derives its meaning from the fact that the tree trunk is peeled using a lathe instead of a saw. The trunk is sliced lengthwise. The slices are joined together then glued and moulded on less costly wood or raw panels of any kind (multilaminates, particle board, waferboard, plywood, hollow core board). The use of wood veneer allows the manufacture of wood products with greater durability, more resistance to woodworms, greater consistency and more attention to visible parts. The use of wood veneer also satisfies today’s need for a more ecology-conscious application of wood resources.

  • Hollow

    Core board panel made by gluing two multilaminates (usually 4 mm thick) on a frame of spruce mouldings or other common wood. The external surfaces can be veneered or lacquered. Inside the interspace in the vertical mouldings, the large panels contain plywood to stiffen the surface. This method of construction allows panels to be created that add strength together with lightness, proving to be ideal, for example, for wardrobe doors.

  • Tecnocover

    Tecnocover is a general purpose material, made up of 20% scrap leather, 55% polyurethane and 25% cotton. Scraps from the processing of natural leather are finely chopped and mixed with rubber, latex and other synthetic aggregates. Sheets of tecnocover can undergo various finishing processes, in order to render them as similar as possible to the corresponding natural version. One specifically important process is embossing, whereby the material is impressed with a specific pattern that imitates the grain of natural leather.

  • Glass

    Common glass is composed almost exclusively of silica, the same substance as quartz. In its purest state, glass is transparent, relatively hard, almost inert from a chemical and biological standpoint and presents a very smooth surface. Glass is available in a wide range of finishes and colours for interior decoration. It is possible to circumvent its intrinsic fragility by using chemical treatments (adding other minerals to the compound) or physical processes, such as tempering.

  • Tempered glass

    Glass subjected to a thermal tempering process, heated at 640° and rapidly cooled by air jets. A highly brittle sheet of glass with high residual stress and enhanced strength is obtained using this process. When broken, tempered glass shatters into pebble-like pieces without sharp edges.

  • ABS

    (Acrylonitrile Butadiene Styrene) A synthetic thermosetting plastic resin with good resistance to acids. It repels dust and cannot warp. For these reasons, ABS is used in the manufacture of edges and sheets for surface coating.

  • Aluminum

    A silvery, highly ductile metal. Its chief properties are resistance to corrosion, tensile strength and it is light weight. These properties are ideal for manufacturing durable yet lightweight frame components. Raw aluminium can be worked using several different processing techniques such as fusion, 20 21 forging or pressing.

  • Leather

    Leather is a protein material derived from the hides and skins of cattle. Processing is referred to as tanning and consists of eliminating the outermost layer of skin and connective tissue (hypodermis). The most important layer is the dermis, consisting of fibrous fascicles of connective and elastic tissue. The upper portion of the dermis, called the grain, is considered to be the highest grade of leather, called “full grain”.

  • Glossy/matt/semi-gloss lacqueredi

    Panels of polyesterized particle board on the front side, faced and then lacquered on both sides with polyurethane polymer-based paint having a high molecular weight. The panels are dimensionally stable.

  • Melamine

    A hardening synthetic resin obtained from polycondensation of formaldehyde. It is a colourless, odourless resin that is resistant to water, chemicals, abrasion and heat and which has particular transparency under light.

  • Methacrylate

    PMMA (Polymethyl Methacrylate), a plastic material formed from polymers of methyl methacrylate, methacrylic acid ester. The extruded surface is further transformed: this step is called thermoforming, a technology that allows us to engrave the smooth sheet and to imprint the decoration. This material is resistant to breakage, shocks, blows, weather and ageing.

  • Medium-density fibreboard (MDF)

    An engineered wood-based product composed of wood fibres or fascicles of wood fibre submitted to processing by a thermomechanical defibrator under high temperature and pressure. The fibres are held together with hardening synthetic resin.

  • Veneered particle board panel

    Panel composed of wood particles with a thin layer of solid wood, called veneer, less than 0,7 mm thick.

  • Particle board panels

    Wood-based panels made from wood particles (shavings, wood chips, etc.) The wood particles are held together with hardening synthetic resin and then heat pressurised. Particle board panels use an assortment of less costly wood which is generally the byproduct of other processes: this is why this type of product is of interest from an ecological standpoint.

  • Linen panel

    Composite plant fibre obtained from the phloem (surface bark) of linum usitatissimum, composed of approximately 70% cellulose. It is a fresh, wear-resistant and soft fibre. Linen is dyed and then finished with special techniques that make it dimensionally stable but give it a slightly stonewashed appearance that amplifies its characteristics as a natural fibre that is extremely comfortable to the touch. It is treated with a special finishing that gives it a natural, soft appearance.

  • Multilaminate board

    Wood-based panel made up of more than 3 layers of wood layers superimposed so that the grains of adjacent layers are at a right angle.

  • Aluminum

    A panel composed of wood particles and covered with a cellulose base material (paper), sheets of polymer (PVC, veneer, ABS, etc.) or with melamine resins.

  • Methacrylate

    Thin slices of wood between 3 and 0.30 millimetres. Peeling derives its meaning from the fact that the tree trunk is peeled using a lathe instead of a saw. The trunk is sliced lengthwise. The slices are joined together then glued and moulded on less costly wood or raw panels of any kind (multilaminates, particle board, waferboard, plywood, hollow core board). The use of wood veneer allows the manufacture of wood products with greater durability, more resistance to woodworms, greater consistency and more attention to visible parts. The use of wood veneer also satisfies today’s need for a more ecology-conscious application of wood resources.

  • Hollow

    Core board panel made by gluing two multilaminates (usually 4 mm thick) on a frame of spruce mouldings or other common wood. The external surfaces can be veneered or lacquered. Inside the interspace in the vertical mouldings, the large panels contain plywood to stiffen the surface. This method of construction allows panels to be created that add strength together with lightness, proving to be ideal, for example, for wardrobe doors.

  • Tecnocover

    Tecnocover is a general purpose material, made up of 20% scrap leather, 55% polyurethane and 25% cotton. Scraps from the processing of natural leather are finely chopped and mixed with rubber, latex and other synthetic aggregates. Sheets of tecnocover can undergo various finishing processes, in order to render them as similar as possible to the corresponding natural version. One specifically important process is embossing, whereby the material is impressed with a specific pattern that imitates the grain of natural leather.

  • Glass

    Common glass is composed almost exclusively of silica, the same substance as quartz. In its purest state, glass is transparent, relatively hard, almost inert from a chemical and biological standpoint and presents a very smooth surface. Glass is available in a wide range of finishes and colours for interior decoration. It is possible to circumvent its intrinsic fragility by using chemical treatments (adding other minerals to the compound) or physical processes, such as tempering.

  • Tempered glass

    Glass subjected to a thermal tempering process, heated at 640° and rapidly cooled by air jets. A highly brittle sheet of glass with high residual stress and enhanced strength is obtained using this process. When broken, tempered glass shatters into pebble-like pieces without sharp edges.

  • The following instructions, broken down by material, provide the best recommendations for preserving your Poliform product for years to come. Use only recommended cleaning products and avoid harsh or abrasive detergents. Proper care will enable you to enjoy your quality Poliform product for many years.

  • Care of wood and wood veneer parts

    We advise to use a neutral detergent. Avoid products containing acetone, thinners, ammonia, abrasive detergents or furniture wax. Caution: the surface of the wood is treated to resist moderate amounts of grease and dirt. In addition, surface coatings contain water-resistant and anti-yellowing agents. However, avoid exposing surfaces to scoring or high temperature.

  • Care of lacquered panels

    We advise to use a neutral detergent, avoid products containing acetone, thinners, ammonia, abrasive detergents or furniture wax. Warning: during initial cleaning, the cloth may pick up some colour. This is a physiological phenomenon and is linked to the presence of paint powders that come to the surface during the drying process: once it is eliminated, you won’t see it again.

  • Care of the particle board panels faced with melamine

    We advise to use a neutral detergent. Avoid products containing acetone, chlorine, thinner or abrasive cleaners.

  • Care of glass panels

    Use vinegar diluted in abundant water or glass cleaning products. Warning: in the event that glass is mounted in an aluminum frame, avoid alcohol or ammonia, which may damage the frame.

  • Care of panel in methacrylate

    We recommend to use only neutral detergent or degreaser with water, with a soft cloth. Avoid the use of alcohol-based substances (for example a detergent for cleaning windows that does not contain alcohol). We recommend the application of an antistatic spray for furniture without alcohol, to improve surface resistance. Leave to dry for 24 hours.

  • Care of hide

    Use a felt or soft wool cloth. Apply leather cream only if necessary. Occasional stains can be removed if they are wiped up immediately with an absorbent cloth. Do not rub the stain but gingerly blot starting from the edge of the stain and work inwards. Avoid any type of aggressive (such as solvents) or abrasive product. Never steam clean. Do not use shoe-cleaning products.

  • Care of tecnocover

    Routine cleaning can be done using a vacuum cleaner with a soft brush attachment, being as gentle as possible. After vacuuming, you can wipe down tecnocover surfaces with a cloth moistened with lukewarm water and carefully wrung dry. Any stains should be removed as quickly as possible, using an absorbent cloth. Do not rub too energetically. We recommend a conditioning treatment every six months, using specific products readily available on the market.

  • Care of linen panel

    Occasionally dust the covering with a soft, neutral cotton cloth. For stains, use a damp cotton cloth (not wet) and neutral detergent only, dab the area, and if necessary, wipe without rubbing excessively but rather in a circular motion working from the outside of the stain inwards, then dry the area with a hair dryer at a distance of approximately 30-40 cm to prevent streaks.

  • Care of hinges, drawer slides, and metal parts

    Lubricate with any product widely available on the market. Use lubricant periodically on hinges and drawer slides before cleaning to remove possible dust. For metal parts, simply wipe down periodically with a damp cloth. Avoid any kind of abrasive cleaning product.

  • Poliform recommends that you do not dispose of your product in the outdoors. Because of our manufacturing techology and the routine use of recyclable materials, discarded Poliform products can be re-used in the manufacturing process. For this reason, drop off your Poliform product at the waste disposal centers within your municipality.
    To facilitate the collection, reuse, recovery and recycling of packaging, we inform you that the packaging is composed as follows: PAP20 carton, PS 06 polystyrene, PELD 04 expanded polyethylene (down), Profiles in Systempack PELD 04.

  • The following instructions, broken down by material, provide the best recommendations for preserving your Poliform product for years to come. Use only recommended cleaning products and avoid harsh or abrasive detergents. Proper care will enable you to enjoy your quality Poliform product for many years.

  • Care of wood and wood veneer parts

    We advise to use a neutral detergent. Avoid products containing acetone, thinners, ammonia, abrasive detergents or furniture wax. Caution: the surface of the wood is treated to resist moderate amounts of grease and dirt. In addition, surface coatings contain water-resistant and anti-yellowing agents. However, avoid exposing surfaces to scoring or high temperature.

  • Care of lacquered panels

    We advise to use a neutral detergent, avoid products containing acetone, thinners, ammonia, abrasive detergents or furniture wax. Warning: during initial cleaning, the cloth may pick up some colour. This is a physiological phenomenon and is linked to the presence of paint powders that come to the surface during the drying process: once it is eliminated, you won’t see it again.

  • Care of the particle board panels faced with melamine

    We advise to use a neutral detergent. Avoid products containing acetone, chlorine, thinner or abrasive cleaners.

  • Care of glass panels

    Use vinegar diluted in abundant water or glass cleaning products. Warning: in the event that glass is mounted in an aluminum frame, avoid alcohol or ammonia, which may damage the frame.

  • Care of panel in methacrylate

    We recommend to use only neutral detergent or degreaser with water, with a soft cloth. Avoid the use of alcohol-based substances (for example a detergent for cleaning windows that does not contain alcohol). We recommend the application of an antistatic spray for furniture without alcohol, to improve surface resistance. Leave to dry for 24 hours.

  • Care of hide

    Use a felt or soft wool cloth. Apply leather cream only if necessary. Occasional stains can be removed if they are wiped up immediately with an absorbent cloth. Do not rub the stain but gingerly blot starting from the edge of the stain and work inwards. Avoid any type of aggressive (such as solvents) or abrasive product. Never steam clean. Do not use shoe-cleaning products.

  • Care of tecnocover

    Routine cleaning can be done using a vacuum cleaner with a soft brush attachment, being as gentle as possible. After vacuuming, you can wipe down tecnocover surfaces with a cloth moistened with lukewarm water and carefully wrung dry. Any stains should be removed as quickly as possible, using an absorbent cloth. Do not rub too energetically. We recommend a conditioning treatment every six months, using specific products readily available on the market.

  • Care of linen panel

    Occasionally dust the covering with a soft, neutral cotton cloth. For stains, use a damp cotton cloth (not wet) and neutral detergent only, dab the area, and if necessary, wipe without rubbing excessively but rather in a circular motion working from the outside of the stain inwards, then dry the area with a hair dryer at a distance of approximately 30-40 cm to prevent streaks.

  • Care of hinges, drawer slides, and metal parts

    Lubricate with any product widely available on the market. Use lubricant periodically on hinges and drawer slides before cleaning to remove possible dust. For metal parts, simply wipe down periodically with a damp cloth. Avoid any kind of abrasive cleaning product.

  • Poliform recommends that you do not dispose of your product in the outdoors. Because of our manufacturing techology and the routine use of recyclable materials, discarded Poliform products can be re-used in the manufacturing process. For this reason, drop off your Poliform product at the waste disposal centers within your municipality.
    To facilitate the collection, reuse, recovery and recycling of packaging, we inform you that the packaging is composed as follows: PAP20 carton, PS 06 polystyrene, PELD 04 expanded polyethylene (down), Profiles in Systempack PELD 04.

  • Central side

    Material: panel of wooden particles faced with melamine
    Thickness: 25 mm
    Edge: ABS

  • Lateral side

    Material: panel of wooden particles
    Inner side finish: melamine
    External side:

    Veneered
    Faced with melamine
    Faced with melamine lacquered
    Panel of wooden particles with white mirror
    Panel of wooden particles with hide applied
    Panel of wooden particles with tecnocover grain applied
    Edge: ABS
    Thickness: 25 mm

  • Walk-in closet side

    Material: panel of wooden particles faced with melamine
    Thickness: 35 mm
    Edge: ABS
    Features: We don’t recommend to apply doors later.

  • Lateral/central frame side

    Material: aluminium painted frame
    Thickness: 25 mm

  • Lateral/central glass side

    Material: aluminium painted frame Glass: tempered glass
    Thickness frame: 25 mm
    Thickness glass: 4 mm

  • Base/top

    Material: panel of wooden particles faced with melamine
    Thickness: 35 mm
    Edge: ABS

  • Standard plinth

    Material: aluminium painted

  • Optional plinth

    Material: aluminium painted

  • Back panel

    Material: panel of wooden particles faced with melamine
    Thickness: 10 mm

  • Glass back panel

    Materiale: tempered glass
    Thickness: 5 mm

  • Roller back panel

    Material: panel of wooden particles faced with methacrylate Thickness: 10 mm

  • Skin back panel

    Material: panel of wooden particles faced with melamine and lacquered

    Thickness: 10 mm

  • Shelf/chest of drawers top/laundry basket

    Material: panel of wooden particles faced with melamine
    Spessore: 35 mm
    Edge: ABS

  • Shelf/chest of drawers top with front

    Material: panel of wooden particles faced with melamine
    Thickness: 35 mm
    Lateral and back edge: ABS
    Front edge: aluminium painted

  • Ripiano/coperchio cassettiera in tecnocover grain con frontale

    Shelf/chest of drawers top in tecnocover grain with front

  • Ripiano/coperchio cassettiera in tecnocover grain con telaio

    Material: panel of wooden particles faced with melamine covered with tecnocover grain Thickness: 35 mm
    Frame: aluminium painted

  • Shelf/chest of drawers top in tecnocover grain with frame

    Material: panel of wooden particles faced with melamine covered with tecnocover grain
    Thickness: 35 mm
    Lateral and rear edge: ABS
    Front edge: aluminium painted

  • Glass shelf/glass shelf with light

    Material: tempered glass
    Thickness: shelf 35 mm – glass 4 mm
    Frame: aluminium painted

  • Inclined shoe shelf

    Material: panel of wooden particles faced with melamine
    Thickness: 35 mm
    Lateral and rear edge: ABS
    Front edge: aluminium painted 4 mm
    Features: 1-2 painted skirting profiles 4 mm (according to the depth)

  • Chest of drawers fillers

    Material: panel in medium density fibre, faced with melamine
    Thickness: 35 mm

  • Chest of drawers structure

    Material: panel of wooden particles faced with melamine
    Thickness: 15 mm
    Rdge: ABS
    Features: supplied with PVC back spacers

  • Wooden drawer/laundry baskets front

    Material: panel of wooden particles faced with melamine Thickness: 25 mm
    Edge: ABS
    Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain

  • Glass drawer front

    Material: glass
    Thickness: 4 mm
    Frame: panel in medium density fibre faced with melamine
    Features: handle in painted aluminium

  • Roller drawer front

    Material: panel of wooden particles faced with methacrylate
    Thickness: 25 mm
    Edge: ABS
    Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain

  • Drawer structure

    Material: panel of wooden particles faced with melamine
    Thickness: 14 mm for the sides, 12 mm for the back and 6 mm for the bottom
    Edge: ABS
    Features: full extraction metal runners with ball bearings and soft closing

  • Tray

    Front: panel of wooden particles faced with melamine
    Thickness: 4 mm sides, 15 mm back and 15 mm bottom
    Bottom: panel of wooden particles faced with melamine or covered in tecnocover grain
    Sides: aluminium painted
    Edge: ABS
    Features: the “shoes holder” option is supplied with round bars in aluminium painted

  • Trouser holder

    Front: panel of wooden particles faced with melamine
    Edge: ABS
    Sides: panel in medium density fibre, faced with melamine
    Back: solid wood panel faced with melamine
    Features: it can be accessorized with bars, tray with partition

  • Shirt holder / bag holder / shoe holder

    Structure: panel of wooden particles faced with melamine
    Shelves: panel of wooden particles faced with melamine or tecnocover grain
    Thickness: 15 mm
    Edge: ABS
    Features: it can be accessorized with boxes

  • Jewellery drawer

    Structure: cardboard covered in fabric

  • Dresser valet

    Material: lacquered panel in medium density fibre
    Thickness: 10 mm
    Bottom: panel of wooden particles faced with melamine covered in tecnocover grain Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments

  • Extractable dresser valet

    Material: fixed structure: c-shaped metal sheet covered in tecnocover grain
    Material: extractable structure: lacquered panel in medium density fibre
    Thickness: fixed structure 3 mm
    Thickness: extractable structure 10 mm
    Bottom: extractable structure: panel of wooden particles faced with melamine
    Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments

  • Display case chest of drawers

    Structure:panel in medium density fibre faced with melamine
    Fronts: panel in medium density fibre faced with melamine and lacquered
    Top: fumé glass with silk-screen printing (4 mm)
    Features: drawers bottoms covered with tecnocover grain, equipped with inner light

  • Club door

    Material: panel of wooden particles faced with melamine
    Thickness: 25 mm
    Edge: ABS same finishing of the front

  • Sand door

    Material: panel of wooden particles faced with melamine
    Thickness: 25 mm
    Edge: ABS same finishing of the front

  • Canvas door

    Material: panel of wooden particles faced with melamine
    Thickness: 25 mm
    Edge: ABS in contrast colour

  • Silk door

    Material: panel of wooden particles faced with melamine
    Thickness: 25 mm Edge: ABS same finishing of the front

  • Skin door

    Material: panel of wooden particles faced with melamine lacquered colours Thickness: 25 mm
    Vertical profile: aluminium painted

  • New Entry lacquered door

    Material: panel of wooden particles faced with melamine
    Finishing: lacquered colours
    Thickness: 25 mm

  • New Entry wooden door

    Material: panel of wooden particles veneered
    Edge: veneered
    Thickness: 25 mm

  • Plus lacquered door

    Material: panel of wooden particles faced with melamine
    Finishing: lacquered colours
    Plus handle: aluminium painted
    Thickness: 25 mm

  • Plus wooden door

    Material: panel of wooden particles veneered
    Edge: veneered
    Plus handle: aluminium painted
    Thickness: 25 mm

  • Plus glass door

    Material: tempered glass thickness 4 mm
    Aluminium profile: painted colours
    Plus handle: painted aluminium
    Thickness: 28 mm

  • Ego door

    Material: tempered glass thickness 4 mm
    Frame: aluminium painted
    Thickness: 42 mm

  • Fitted door

    Material: tempered glass thickness 4 mm
    Profile: aluminium painted
    Thickness: 28 mm

  • Ocean door

    Material: panel of wooden particles with applied glass/mirror
    Profile: aluminium painted
    Thickness: 25 mm

  • Cover door tecnocover grain

    Materiale: pannello di particelle di legno
    Finitura: tecnocover grain
    Telaio: alluminio verniciato
    Maniglia Cover: alluminio verniciato e rivestita in tecnocover grain
    Spessore: 25 mm

  • Cover door fabric

    Material: panel of wooden particles
    Finishing: fabric
    Frame: aluminium painted
    Fitted handle: aluminium painted
    Thickness: 25 mm

  • Cover door glass

    Material: panel of wooden particles with glass
    Frame: aluminium painted
    Fitted handle: aluminium painted
    Thickness: 25 mm

  • Bangkok door

    Material: honeycomb panel covered
    Finishing: hide
    Bangkok handle: aluminium painted
    Thickness: 30 mm

  • Match wooden door

    Material: panel of wooden particles veneered
    Edge: veneered
    Match handle: aluminium painted with wooden insert
    Thickness: 25 mm

  • Match tecnocover door

    Material: panel of wooden particles
    Finish: tecnocover grain colours
    Frame: painted aluminium
    Match handle: painted aluminium and covered in tecnocover grain
    Thickness: 25 mm

  • Match glass door

    Material: panel of wooden particles
    Finish: tecnocover grain colours
    Frame: painted aluminium
    Match handle: painted aluminium and covered in tecnocover grain
    Thickness: 25 mm

  • Central side

    Material: panel of wooden particles faced with melamine
    Thickness: 25 mm
    Edge: ABS

  • Lateral side

    Material: panel of wooden particles
    Inner side finish: melamine
    External side:

    Veneered
    Faced with melamine
    Faced with melamine lacquered
    Panel of wooden particles with white mirror
    Panel of wooden particles with hide applied
    Panel of wooden particles with tecnocover grain applied
    Edge: ABS
    Thickness: 25 mm

  • Walk-in closet side

    Material: panel of wooden particles faced with melamine
    Thickness: 35 mm
    Edge: ABS
    Features: We don’t recommend to apply doors later.

  • Lateral/central frame side

    Material: aluminium painted frame
    Thickness: 25 mm

  • Lateral/central glass side

    Material: aluminium painted frame Glass: tempered glass
    Thickness frame: 25 mm
    Thickness glass: 4 mm

  • Base/top

    Material: panel of wooden particles faced with melamine
    Thickness: 35 mm
    Edge: ABS

  • Standard plinth

    Material: aluminium painted

  • Optional plinth

    Material: aluminium painted

  • Back panel

    Material: panel of wooden particles faced with melamine
    Thickness: 10 mm

  • Glass back panel

    Materiale: tempered glass
    Thickness: 5 mm

  • Roller back panel

    Material: panel of wooden particles faced with methacrylate Thickness: 10 mm

  • Skin back panel

    Material: panel of wooden particles faced with melamine and lacquered

    Thickness: 10 mm

  • Shelf/chest of drawers top/laundry basket

    Material: panel of wooden particles faced with melamine
    Spessore: 35 mm
    Edge: ABS

  • Shelf/chest of drawers top with front

    Material: panel of wooden particles faced with melamine
    Thickness: 35 mm
    Lateral and back edge: ABS
    Front edge: aluminium painted

  • Ripiano/coperchio cassettiera in tecnocover grain con frontale

    Shelf/chest of drawers top in tecnocover grain with front

  • Ripiano/coperchio cassettiera in tecnocover grain con telaio

    Material: panel of wooden particles faced with melamine covered with tecnocover grain Thickness: 35 mm
    Frame: aluminium painted

  • Shelf/chest of drawers top in tecnocover grain with frame

    Material: panel of wooden particles faced with melamine covered with tecnocover grain
    Thickness: 35 mm
    Lateral and rear edge: ABS
    Front edge: aluminium painted

  • Glass shelf/glass shelf with light

    Material: tempered glass
    Thickness: shelf 35 mm – glass 4 mm
    Frame: aluminium painted

  • Inclined shoe shelf

    Material: panel of wooden particles faced with melamine
    Thickness: 35 mm
    Lateral and rear edge: ABS
    Front edge: aluminium painted 4 mm
    Features: 1-2 painted skirting profiles 4 mm (according to the depth)

  • Chest of drawers fillers

    Material: panel in medium density fibre, faced with melamine
    Thickness: 35 mm

  • Chest of drawers structure

    Material: panel of wooden particles faced with melamine
    Thickness: 15 mm
    Rdge: ABS
    Features: supplied with PVC back spacers

  • Wooden drawer/laundry baskets front

    Material: panel of wooden particles faced with melamine Thickness: 25 mm
    Edge: ABS
    Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain

  • Glass drawer front

    Material: glass
    Thickness: 4 mm
    Frame: panel in medium density fibre faced with melamine
    Features: handle in painted aluminium

  • Roller drawer front

    Material: panel of wooden particles faced with methacrylate
    Thickness: 25 mm
    Edge: ABS
    Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain

  • Drawer structure

    Material: panel of wooden particles faced with melamine
    Thickness: 14 mm for the sides, 12 mm for the back and 6 mm for the bottom
    Edge: ABS
    Features: full extraction metal runners with ball bearings and soft closing

  • Tray

    Front: panel of wooden particles faced with melamine
    Thickness: 4 mm sides, 15 mm back and 15 mm bottom
    Bottom: panel of wooden particles faced with melamine or covered in tecnocover grain
    Sides: aluminium painted
    Edge: ABS
    Features: the “shoes holder” option is supplied with round bars in aluminium painted

  • Trouser holder

    Front: panel of wooden particles faced with melamine
    Edge: ABS
    Sides: panel in medium density fibre, faced with melamine
    Back: solid wood panel faced with melamine
    Features: it can be accessorized with bars, tray with partition

  • Shirt holder / bag holder / shoe holder

    Structure: panel of wooden particles faced with melamine
    Shelves: panel of wooden particles faced with melamine or tecnocover grain
    Thickness: 15 mm
    Edge: ABS
    Features: it can be accessorized with boxes

  • Jewellery drawer

    Structure: cardboard covered in fabric

  • Dresser valet

    Material: lacquered panel in medium density fibre
    Thickness: 10 mm
    Bottom: panel of wooden particles faced with melamine covered in tecnocover grain Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments

  • Extractable dresser valet

    Material: fixed structure: c-shaped metal sheet covered in tecnocover grain
    Material: extractable structure: lacquered panel in medium density fibre
    Thickness: fixed structure 3 mm
    Thickness: extractable structure 10 mm
    Bottom: extractable structure: panel of wooden particles faced with melamine
    Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments

  • Display case chest of drawers

    Structure:panel in medium density fibre faced with melamine
    Fronts: panel in medium density fibre faced with melamine and lacquered
    Top: fumé glass with silk-screen printing (4 mm)
    Features: drawers bottoms covered with tecnocover grain, equipped with inner light

  • Club door

    Material: panel of wooden particles faced with melamine
    Thickness: 25 mm
    Edge: ABS same finishing of the front

  • Sand door

    Material: panel of wooden particles faced with melamine
    Thickness: 25 mm
    Edge: ABS same finishing of the front

  • Canvas door

    Material: panel of wooden particles faced with melamine
    Thickness: 25 mm
    Edge: ABS in contrast colour

  • Silk door

    Material: panel of wooden particles faced with melamine
    Thickness: 25 mm Edge: ABS same finishing of the front

  • Skin door

    Material: panel of wooden particles faced with melamine lacquered colours Thickness: 25 mm
    Vertical profile: aluminium painted

  • New Entry lacquered door

    Material: panel of wooden particles faced with melamine
    Finishing: lacquered colours
    Thickness: 25 mm

  • New Entry wooden door

    Material: panel of wooden particles veneered
    Edge: veneered
    Thickness: 25 mm

  • Plus lacquered door

    Material: panel of wooden particles faced with melamine
    Finishing: lacquered colours
    Plus handle: aluminium painted
    Thickness: 25 mm

  • Plus wooden door

    Material: panel of wooden particles veneered
    Edge: veneered
    Plus handle: aluminium painted
    Thickness: 25 mm

  • Plus glass door

    Material: tempered glass thickness 4 mm
    Aluminium profile: painted colours
    Plus handle: painted aluminium
    Thickness: 28 mm

  • Ego door

    Material: tempered glass thickness 4 mm
    Frame: aluminium painted
    Thickness: 42 mm

  • Fitted door

    Material: tempered glass thickness 4 mm
    Profile: aluminium painted
    Thickness: 28 mm

  • Ocean door

    Material: panel of wooden particles with applied glass/mirror
    Profile: aluminium painted
    Thickness: 25 mm

  • Cover door tecnocover grain

    Materiale: pannello di particelle di legno
    Finitura: tecnocover grain
    Telaio: alluminio verniciato
    Maniglia Cover: alluminio verniciato e rivestita in tecnocover grain
    Spessore: 25 mm

  • Cover door fabric

    Material: panel of wooden particles
    Finishing: fabric
    Frame: aluminium painted
    Fitted handle: aluminium painted
    Thickness: 25 mm

  • Cover door glass

    Material: panel of wooden particles with glass
    Frame: aluminium painted
    Fitted handle: aluminium painted
    Thickness: 25 mm

  • Bangkok door

    Material: honeycomb panel covered
    Finishing: hide
    Bangkok handle: aluminium painted
    Thickness: 30 mm

  • Match wooden door

    Material: panel of wooden particles veneered
    Edge: veneered
    Match handle: aluminium painted with wooden insert
    Thickness: 25 mm

  • Match tecnocover door

    Material: panel of wooden particles
    Finish: tecnocover grain colours
    Frame: painted aluminium
    Match handle: painted aluminium and covered in tecnocover grain
    Thickness: 25 mm

  • Match glass door

    Material: panel of wooden particles
    Finish: tecnocover grain colours
    Frame: painted aluminium
    Match handle: painted aluminium and covered in tecnocover grain
    Thickness: 25 mm

  • Back panel

    Structure: panel of wooden particles faced with melamine panel of wooden particles with applied glass/mirror
    Thickness: 25 mm
    Edge: ABS
    Features: supplied with aluminum profile
    with rack to hook shelves. Adjustable feet.

  • Skin back panel

    Structure: panel of wooden particles faced with melamine matt lacquered colours
    Thickness: 25 mm
    Features: supplied with profile in aluminium painted with rack for shelves
    fixing. Adjustable feet.

  • Roller back panel

    Structure: panel of wooden particles faced with methacrylate
    Thickness: 25 mm
    Features: supplied with profile in aluminium painted with rack for shelves
    fixing. Adjustable feet.

  • Glass back panel

    Structure: panel of wooden particles with glass or mirror
    Thickness: 25 mm
    Features: supplied with profile in aluminium painted with rack for shelves fixing. Adjustable feet.

  • Shelf/chest of drawers top in melamine

    Material: panel of wooden particles faced with melamine
    Edge: ABS
    Thickness: 35 mm
    Features: supplied with iron plates painted for back panel fixing.

  • Shelf/chest of drawers top in melamine with front

    Material: panel of wooden particles faced with melamine
    Thickness: 35 mm
    Lateral edge: ABS
    Front edge: aluminium painted
    Features: supplied with iron plates painted for back panel fixing

  • Shelf/chest of drawers top in tecnocover grain with front

    Material: panel of wooden particles faced with melamine
    Finishing: tecnocover grain
    Thickness: 35 mm
    Front: aluminium painted
    Features: supplied with iron plates painted for back panel fixing

  • Shelf/chest of drawers top in tecnocover grain with frame

    Material: panel of wooden particles faced with melamine
    Finishing: tecnocover grain
    Thickness: 35 mm
    Front: aluminium painted
    Features: supplied with iron plates painted for back panel fixing

  • Shelf in glass/shelf in glass with light

    Material: tempered glass
    Thickness: 35 mm – glass 4 mm
    Frame: aluminium painted

  • Inclined shoe shelf

    Material: panel of wooden particles faced with melamine
    Thickness: 35 mm
    Lateral and rear edge: ABS
    Front edge: aluminium painted 4 mm
    Features: painted shoe profile 4 mm

  • Base

    Material: panel of wooden particles faced with melamine
    Edge: ABS
    Thickness: 35 mm
    Features: supplied with plinth in painted aluminium and adjustable feet

  • Standard plinth

    Material: painted aluminium

  • Optional plinth

    Material: painted aluminium

  • Chest of drawers structure

    Material: panel of wooden particles faced with melamine
    Thickness: 10/15/25 mm
    Edge: ABS
    Features: available also with wheels

  • Wooden drawer/laundry basket

    Material: panel of wooden particles faced with melamine, MDF panel with melamine
    Thickness: 25 mm
    Edge: ABS
    Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain

  • Glass drawer front

    Material: glass Thickness: 4 mm Frame: birch plywood melamine
    Features: handle in painted aluminium

  • Roller drawers front

    Material: panel of wooden particles faced with methacrylate Thickness: 25 mm Edge: ABS Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain

  • Trouser holder

    Front: panel of wooden particles faced with melamine
    Edge: ABS Sides: panel in medium density fibre, faced with melamine
    Back: solid wood panel faced with melamine Features: it can be accessorized with bars/tray with partitions

  • Drawer structure

    Material: panel of wooden particles faced with melamine Thickness: 14 mm for the sides, 12 mm for the back and 6 mm for the bottom Edge: ABS
    Features: full extraction metal runners with ball bearings and soft closing

  • Tray

    Front: panel of wooden particles faced with melamine Thickness: 4 mm sides, 15 mm back panel and 15 mm bottom Bottom: panel of wooden particles faced with melamine or covered in tecnocover grain Sides: aluminium painted Edge: ABS
    Features: the “shoes holder” option is supplied with round bars in aluminium painted

  • Dresser valet

    Material: mat lacquered panel in medium density fibre Thickness: 10 mm Bottom: panel of wooden particles faced with melamine covered in tecnocover grain Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments

  • Extractable dresser valet

    Material: fixed structure: c-shaped metal sheet covered in tecnocover grain Material: extractable structure: mat lacquered panel in medium density fibre Thickness: fixed structure 3 mm, extractable structure 10 mm Bottom: extractable structure: panel of wooden particles faced with melamine Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments

  • Shirt holder/handbag holder/shoe holder

    Structure: panel of wooden particles faced with melamine Shelves: panel of wooden particles faced with melamine or covered in tecnocover grain Thickness: 15 mm Edge: ABS Features: it can be equipped with boxes

  • Jewellery drawer

    Structure: cardboard covered in fabric

  • Display case chest of drawers

    Structure: panel in medium density fibre faced with melamine Front: panel in medium density fibre faced with melamine and lacquered Top: glass fumé with silkscreen printing (4 mm) Features: drawers bottom covered in tecnocover grain accessorized with inner light

  • Back panel

    Structure: panel of wooden particles faced with melamine panel of wooden particles with applied glass/mirror
    Thickness: 25 mm
    Edge: ABS
    Features: supplied with aluminum profile
    with rack to hook shelves. Adjustable feet.

  • Skin back panel

    Structure: panel of wooden particles faced with melamine matt lacquered colours
    Thickness: 25 mm
    Features: supplied with profile in aluminium painted with rack for shelves
    fixing. Adjustable feet.

  • Roller back panel

    Structure: panel of wooden particles faced with methacrylate
    Thickness: 25 mm
    Features: supplied with profile in aluminium painted with rack for shelves
    fixing. Adjustable feet.

  • Glass back panel

    Structure: panel of wooden particles with glass or mirror
    Thickness: 25 mm
    Features: supplied with profile in aluminium painted with rack for shelves fixing. Adjustable feet.

  • Shelf/chest of drawers top in melamine

    Material: panel of wooden particles faced with melamine
    Edge: ABS
    Thickness: 35 mm
    Features: supplied with iron plates painted for back panel fixing.

  • Shelf/chest of drawers top in melamine with front

    Material: panel of wooden particles faced with melamine
    Thickness: 35 mm
    Lateral edge: ABS
    Front edge: aluminium painted
    Features: supplied with iron plates painted for back panel fixing

  • Shelf/chest of drawers top in tecnocover grain with front

    Material: panel of wooden particles faced with melamine
    Finishing: tecnocover grain
    Thickness: 35 mm
    Front: aluminium painted
    Features: supplied with iron plates painted for back panel fixing

  • Shelf/chest of drawers top in tecnocover grain with frame

    Material: panel of wooden particles faced with melamine
    Finishing: tecnocover grain
    Thickness: 35 mm
    Front: aluminium painted
    Features: supplied with iron plates painted for back panel fixing

  • Shelf in glass/shelf in glass with light

    Material: tempered glass
    Thickness: 35 mm – glass 4 mm
    Frame: aluminium painted

  • Inclined shoe shelf

    Material: panel of wooden particles faced with melamine
    Thickness: 35 mm
    Lateral and rear edge: ABS
    Front edge: aluminium painted 4 mm
    Features: painted shoe profile 4 mm

  • Base

    Material: panel of wooden particles faced with melamine
    Edge: ABS
    Thickness: 35 mm
    Features: supplied with plinth in painted aluminium and adjustable feet

  • Standard plinth

    Material: painted aluminium

  • Optional plinth

    Material: painted aluminium

  • Chest of drawers structure

    Material: panel of wooden particles faced with melamine
    Thickness: 10/15/25 mm
    Edge: ABS
    Features: available also with wheels

  • Wooden drawer/laundry basket

    Material: panel of wooden particles faced with melamine, MDF panel with melamine
    Thickness: 25 mm
    Edge: ABS
    Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain

  • Glass drawer front

    Material: glass Thickness: 4 mm Frame: birch plywood melamine
    Features: handle in painted aluminium

  • Roller drawers front

    Material: panel of wooden particles faced with methacrylate Thickness: 25 mm Edge: ABS Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain

  • Trouser holder

    Front: panel of wooden particles faced with melamine
    Edge: ABS Sides: panel in medium density fibre, faced with melamine
    Back: solid wood panel faced with melamine Features: it can be accessorized with bars/tray with partitions

  • Drawer structure

    Material: panel of wooden particles faced with melamine Thickness: 14 mm for the sides, 12 mm for the back and 6 mm for the bottom Edge: ABS
    Features: full extraction metal runners with ball bearings and soft closing

  • Tray

    Front: panel of wooden particles faced with melamine Thickness: 4 mm sides, 15 mm back panel and 15 mm bottom Bottom: panel of wooden particles faced with melamine or covered in tecnocover grain Sides: aluminium painted Edge: ABS
    Features: the “shoes holder” option is supplied with round bars in aluminium painted

  • Dresser valet

    Material: mat lacquered panel in medium density fibre Thickness: 10 mm Bottom: panel of wooden particles faced with melamine covered in tecnocover grain Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments

  • Extractable dresser valet

    Material: fixed structure: c-shaped metal sheet covered in tecnocover grain Material: extractable structure: mat lacquered panel in medium density fibre Thickness: fixed structure 3 mm, extractable structure 10 mm Bottom: extractable structure: panel of wooden particles faced with melamine Features: it can be accessorized with men/women wrist watch tray, cufflink/ring tray, earrings tray and open compartments

  • Shirt holder/handbag holder/shoe holder

    Structure: panel of wooden particles faced with melamine Shelves: panel of wooden particles faced with melamine or covered in tecnocover grain Thickness: 15 mm Edge: ABS Features: it can be equipped with boxes

  • Jewellery drawer

    Structure: cardboard covered in fabric

  • Display case chest of drawers

    Structure: panel in medium density fibre faced with melamine Front: panel in medium density fibre faced with melamine and lacquered Top: glass fumé with silkscreen printing (4 mm) Features: drawers bottom covered in tecnocover grain accessorized with inner light

  • Upright

    Material: aluminium painted Thickness: 32 mm Features: upper and lower adjustments

  • Shelf/chest of drawers top in melamine with fronts

    Material: panel of wooden particles faced with melamine Thickness: 35 mm Lateral: edge ABS Front: aluminium painted Features: supplied with painted iron plates to attach to the upright

  • Shelf/chest of drawers top in tecnocover grain with frame

    Material: panel of wooden particles faced with melamine
    Finishing: tecnocover grain
    Thickness: 35 mm
    Frame: aluminium painted Features: supplied with painted iron plates to attach to the upright

  • Shelf in glass/glass with light

    Material: glass fumé Thickness: shelf 35 mm (glass 4 mm) Frame: aluminium painted features: supplied with painted iron plates to attach to the upright

  • Chest of drawers structure

    Material: panel of wooden particles faced with melamine Thickness: 15 mm – 25 mm back panel Edge: ABS

  • Wooden drawer front

    Material: panel of wooden particles faced with melamine Thickness: 25 mm Edge: ABS Features: Track handle painted aluminium, Step handle painted aluminium or tecnocover grain

  • Glass drawer front

    Material: glass reflecting fumé Thickness: front 25 mm (glass 4 mm) Frame: panel in medium density fibre faced with melamine Features: handle in painted aluminium

  • Roller drawer front

    Material: panel of wooden particles in melamine faced with methacrylate Thickness: 25 mm Edge: ABS Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain

  • Drawers structure

    Material: panel of wooden particles faced with melamine Thickness: 14 mm sides, 12 mm back panel and 6 mm bottom Edge: ABS Features: metal runners with ball bearings and soft closing

  • Tray

    Front: panel of wooden particles faced with melamine Thickness: 4 mm sides, 15 mm back panel and 15 mm bottom Bottom: panel of wooden particles faced with melamine or covered in tecnocover grain Sides rails: panel of wooden particles faced with melamine Edge: ABS Features: in the “shoe shelf” option it is supplied with small bars

  • Trousers hanger

    Front: panel of wooden particles faced with melamine Edge: ABS Spondine: panel in medium density fibre faced with melamine Back panel: panel in solid wood with melamine Features: it can be equipped with trousers hanger, tray with partition elements

  • Shirt holder / bag holder / shoe holder

    Structure: panel of wooden particles faced with melamine Shelves: panel of wooden particles faced with melamine or tecnocover grain Thickness: 15 mm Edge: ABS Features: it can be equipped with boxes

  • Hanging chest of drawers with glass top

    Structure: panel in medium density fibre faced with melamine Fronts: panel in medium density fibre faced with glossy melamine Top: glass fumé with silkscreen printing (4 mm) Features: drawers bottom covered in tecnocover grain colours equipped with inner light

  • Upright

    Material: aluminium painted Thickness: 32 mm Features: upper and lower adjustments

  • Shelf/chest of drawers top in melamine with fronts

    Material: panel of wooden particles faced with melamine Thickness: 35 mm Lateral: edge ABS Front: aluminium painted Features: supplied with painted iron plates to attach to the upright

  • Shelf/chest of drawers top in tecnocover grain with frame

    Material: panel of wooden particles faced with melamine
    Finishing: tecnocover grain
    Thickness: 35 mm
    Frame: aluminium painted Features: supplied with painted iron plates to attach to the upright

  • Shelf in glass/glass with light

    Material: glass fumé Thickness: shelf 35 mm (glass 4 mm) Frame: aluminium painted features: supplied with painted iron plates to attach to the upright

  • Chest of drawers structure

    Material: panel of wooden particles faced with melamine Thickness: 15 mm – 25 mm back panel Edge: ABS

  • Wooden drawer front

    Material: panel of wooden particles faced with melamine Thickness: 25 mm Edge: ABS Features: Track handle painted aluminium, Step handle painted aluminium or tecnocover grain

  • Glass drawer front

    Material: glass reflecting fumé Thickness: front 25 mm (glass 4 mm) Frame: panel in medium density fibre faced with melamine Features: handle in painted aluminium

  • Roller drawer front

    Material: panel of wooden particles in melamine faced with methacrylate Thickness: 25 mm Edge: ABS Features: Track handle aluminium painted, Step handle aluminium painted or tecnocover grain

  • Drawers structure

    Material: panel of wooden particles faced with melamine Thickness: 14 mm sides, 12 mm back panel and 6 mm bottom Edge: ABS Features: metal runners with ball bearings and soft closing

  • Tray

    Front: panel of wooden particles faced with melamine Thickness: 4 mm sides, 15 mm back panel and 15 mm bottom Bottom: panel of wooden particles faced with melamine or covered in tecnocover grain Sides rails: panel of wooden particles faced with melamine Edge: ABS Features: in the “shoe shelf” option it is supplied with small bars

  • Trousers hanger

    Front: panel of wooden particles faced with melamine Edge: ABS Spondine: panel in medium density fibre faced with melamine Back panel: panel in solid wood with melamine Features: it can be equipped with trousers hanger, tray with partition elements

  • Shirt holder / bag holder / shoe holder

    Structure: panel of wooden particles faced with melamine Shelves: panel of wooden particles faced with melamine or tecnocover grain Thickness: 15 mm Edge: ABS Features: it can be equipped with boxes

  • Hanging chest of drawers with glass top

    Structure: panel in medium density fibre faced with melamine Fronts: panel in medium density fibre faced with glossy melamine Top: glass fumé with silkscreen printing (4 mm) Features: drawers bottom covered in tecnocover grain colours equipped with inner light

ERNEST

SAINT-GERMAIN

Sofa
View all